Specifications

AirPrime Embedded Module Hardware Integration Guide
28 Proprietary and Confidential 2130114
CDMA Sleep, default slot cycle = 2
(MC5727/MC5727V)
1.4 1.7 1.75
CDMA Sleep, default slot cycle = 2 (MC5728V)
The module supports slotted mode operation and Quick
Paging Channel (both enable reduced sleep current). The
values shown are the lowest power consumption during
the sleep cycle.
The default Slot Cycle Index (SCI) for slotted mode
operation is determined by the PRI setting (usually 1).
1.9 2.1 5.6
Deep Sleep Average
(MC5727/MC5727V/MC5728V)
0.5 0.7 1.5
Shutdown (MC5727/MC5727V) 0.25 0.30 0.35
Shutdown (MC5728V) 0.24 0.27 0.30
Table 2-3: Current specifications (MC57xx) (Continued)
Condition
Current consumption
(mA)
Min Typical Max
Table 2-4: Current specifications (MC8201)
a
Description Band Typ Max Units Notes/Configuration
Averaged standby DC current consumption
With Sleep mode activated (assumes USB bus is fully suspended during measurements)
HSDPA/WCDMA Bands II, V 4 5 mA DRX cycle = 8 (2.56 s)
GSM/GPRS/EDGE GSM 850,
GSM 1900
4 5 mA MFRM = 5 (1.175 s)
With Sleep mode deactivated (assumes USB bus is fully suspended during measurements)
HSDPA/WCDMA Bands II, V 40 50 mA DRX cycle = 8 (2.56 s)
GSM/GPRS/EDGE GSM 850,
GSM 1900
40 50 mA MFRM = 5 (1.175 s)
Low Power Mode (LPM)/Offline Mode
RF disabled, but module is operational 4 5 mA This state is entered when Watcher (or
other application) shuts down/turns off the
radio.
Averaged Call Mode WCDMA/HSPA/HSPA+ data DC power consumption
WCDMA Bands II, V 700 mA 384 kbps at 20 dBm Tx power
b
300 mA 0dBm Tx power
HSDPA
(1.8 Mbps/3.6 Mbps)
800 mA All speeds at 20 dBm Tx power
c
370 mA 0dBm Tx power
Peak current (averaged
over 100 s)
720 mA