Instruction Manual

Chapter 19 Filters 798
•
Repeat Edges: Sets whether the edges of the object are repeated.
•
Mix: Sets the percentage of the original image to be blended with the distorted image.
Wave
Distorts an image to simulate waves oscillating across it. The wave lter is not automatically
animated, but you can animate the Oset parameter to create an undulating eect.
For information on animating parameters, see Parameter behaviors overview on page 332.
This lter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image
Wave filter applied
Parameters in the Inspector
•
Amplitude: Sets the amplitude of the waves.
•
Wavelength: Sets the length of the waves.
•
Oset: Sets the oset of the wave.
•
Vertical: Sets whether the waves run vertically or horizontally.
•
Repeat Edges: Sets whether the edges of the object are repeated.
•
Mix: Sets the percentage of the original image to be blended with the distorted image.
Glow lters
Glow lters overview
Glow lters combine blur with brightness and color eects. The results are automatically
recomposited over the original image in various ways. Glows can be used to simulate lm
eects, as a method to render your footage more abstract, or as accents to make elements in a
composition stand out.
For a description of each Glow lter, see the lters list in the Help table of contents (the sidebar
to the left of this window).
67% resize factor