Instruction Manual

Chapter 19 Filters 824
•
Feathering: Sets the amount of feathering applied to the edges of each tile.
•
Seed: Sets a number to be used as a seed for tile placement and stacking.
•
Mix: Sets the percentage of the original image to be blended with the ltered image.
•
Publish OSC: Publishes the lter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see Final Cut Pro X templates overview on page 385.
Tile
Tiles an image. The number of tiles depends on the value of the Scale parameter.
This lter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image
Tile filter applied
Parameters in the Inspector
•
Center: Sets the position of the origin of the tiles. Drag the Center onscreen control to adjust
its value in the Canvas.
•
Skew: Sets the amount of skew applied to tiles.
•
Scale: Sets how much tiles are scaled.
•
Stretch: Sets the amount tiles are stretched vertically.
•
Angle: Sets the angle of rotation of tiles.
•
Mix: Sets the percentage of the original image to be blended with the ltered image.
•
Publish OSC: Publishes the lter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see Final Cut Pro X templates overview on page 385.
Triangle Tile
Tiles an image with triangular shaped panels. The eect is similar to a kaleidoscope lter. This
lter is not automatically animated, but by animating the Angle parameter you can simulate the
eect of twisting the kaleidoscope to rotate the image pattern.
67% resize factor