5.1.1

Chapter 19 Filters 812
Indent
Creates a shiny, bump-mapped eect, giving the appearance of depressed and at areas. This
lter causes rasterization in 3D groups. For more information on rasterization, see Groups and
rasterization on page 1045.
Original image
Indent filter applied
Parameters in the Inspector
•
Softness: Sets the softness of the transition between at and raised areas.
•
Brightness: Sets the level of brightness of the object.
•
Ambient: Sets the amount of ambient light hitting the object.
•
Highlight Brightness: Sets the amount of brightness applied to highlights of the object.
•
Highlight Sharpness: Sets the degree of sharpness applied to highlights of the object.
•
Light Rotation: Sets the angle, in degrees, at which the ambient light hits the object.
•
Depth: Sets the amount of depth between at and raised areas.
•
Height Map: Displays a thumbnail of the height map chosen. If present, the height map is
used to determine the at and raised areas of the object. To learn how to add an object to the
Height Map well, see Source well on page 132 .
•
Map Channel: Sets the channel from the object used to determine the at and raised areas of
the image. If a height map is present, the channel is selected from the height map. Otherwise,
values include Luminance (default), Red, Green, Blue, or Alpha.
•
Stretch To Fit: Sets whether the Height Map is stretched to t the dimensions of the
ltered object.
•
Height Map X Scale: Sets the scaling used to determine the width of the Height Map. This
parameter becomes available when the Stretch To Fit checkbox is deselected.
•
Height Map Y Scale: Sets the scaling used to determine the height of the Height Map. This
parameter becomes available when the Stretch To Fit checkbox is deselected.
•
Height Map X Oset: Sets the amount of oset used to position the Height Map horizontally.
This parameter becomes available when the Stretch To Fit checkbox is deselected.
•
Height Map Y Oset: Sets the amount of oset used to position the Height Map vertically. This
parameter becomes available when the Stretch To Fit checkbox is deselected.
•
Mix: Sets the percentage of the original image to be blended with the ltered image.
Line Art
Performs an edge detection of the high-contrast borders between regions of diering brightness
in an object, tracing the edges and reducing other detail in the image to the color specied by
the Paper Color parameter. The color of the resulting outline can also be customized. The eect is
that of a line drawing on paper.
67% resize factor