5.1.1

Table Of Contents
Chapter 19 Filters 817
This lter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image Slit Scan filter applied
Parameters in the Inspector
Center: Sets the position of the center of the slit. Drag the Center onscreen control to adjust its
value in the Canvas.
Rotation: Sets the angle of rotation of the slit.
Speed: Sets the speed of the simulation.
Perspective: Sets the angle of perspective on the object.
Glow: Sets the amount of the glow on the slit.
Glow Color: Picks the color of the glow of the slit. Use the disclosure triangle to display Red,
Green, and Blue sliders for more precise color selection.
Oset: Sets the amount of oset between what is above and what is below the slit.
Mix: Sets the percentage of the original image to be blended with the ltered image.
Publish OSC: Publishes the lter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see Final Cut Pro X templates overview on page 385.
Slit Tunnel
Simulates a circular version of the slit scan process used to create “warp tunnel” images in science
ction lms. This lter is automatically animated to create a y-through eect.
This lter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image
Slit Tunnel filter applied
Parameters in the Inspector
Center: Sets the position of the center of the tunnel. Drag the Center onscreen control to
adjust its value in the Canvas.
67% resize factor