Specifications

Control Panel Messages
5-20 ❖ System Administrator Guide
Motor Failure
Power Off/On
The printer motor has failed; printing cannot resume. Power OFF and ON the
printer. If the problem persists, contact your Customer Support Center.
NV Memory Failure
Power Off/On
Nonvolatile memory on the printer controller has failed and printing cannot
resume. Power OFF and ON the printer. If the problem persists, contact your
Customer Support Center.
OEM ID Mismatch
The Laser Print Cartridge is not manufactured specifically for this printer.
Install the Laser Print Cartridge for this printer. To order a Laser Print
Cartridge, contact your Customer Support Center.
Offline
The printer is offline, not in menu mode, and without any fault conditions.
Offline does not mean the printer is disconnected from a host. It means page
formatting and printing are halted.
• To put the printer online, press
Online
.
• To select menus, press
Menu Up
or
Menu Down
.
Out of Memory
This message appears when the current PCL or PostScript job cannot print
because it exceeds available memory. Split the job into smaller jobs, or install
additional memory.
Out of Toner
This message appears when the Laser Print Cartridge is out of toner. Replace
the cartridge. See
“Replacing the Laser Print Cartridge”
(page 4-2)
.
Paper Jam
Clear Area A
A paper jam has occurred in Area A. Open Door A and remove jammed
paper. Refer to the section
“Clearing Paper Jams”
(page 5-32) and the
procedure
“Clearing Area A (Without Duplex Module)”
(page 5-33),
or
“Clearing Area A (With Duplex Module)”
(page 5-35).
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 16 of 24