Specifications
74 - Power Mac G5 Take Apart
Front Inlet Fan Cable
Front Inlet Fan Cable
Tools
The only tools required for this procedure are a long-handled Phillips screwdriver, a short-
handled Phillips screwdriver, and a hex wrench.
Preliminary Steps
Before you begin, open the computer, lay it on its side with the access side facing up, and
remove the following:
• Front inlet fan assembly
• Processor(s)
• All AGP and PCI cards
• Rear exhaust fan assembly
• Speaker/fan assembly
• Front panel board cable
• Power supply
• Logic board
• PCI divider
Part Location