Specifications

Power Mac G5 (Late 2004) Take Apart - 67
Logic Board
6. Carefully tilt the front edge of the logic board up and maneuver the board out of the
enclosure. Place the board on an ESD-safe surface with the processor facing up.
Note: Perform the next steps only if you are replacing the logic board with a new board.
7. Transfer the following from the original logic board to the replacement logic board (see
individual procedures earlier in this chapter for detailed steps):
• Memory DIMMs
• Modem (if installed)
• Bluetooth card (if installed)
8. Transfer the port EMI shield from the original logic board to the replacement logic
board, making sure the shield is fully seated on the ports.