User's Manual

Troubleshooting Symptom Charts/Floppy Drive - 29
4 Replace logic board.
5 Replace processor module.
Drive attempts to
eject disk, but doesn’t
1 Reseat floppy drive bezel and drive so bezel slot aligns
correctly with drive.
2 Replace floppy drive.
Internal floppy drive
runs continuously
1 Replace disk with known-good floppy disk.
2 Replace floppy drive cable.
3 Replace floppy drive.
4 Replace logic board.
5 Replace processor module.
MS-DOS drive does
not recognize a disk
formatted on a 1.4 MB
drive
To read and write files with either MS-DOS or 1.4 MB drive,
format all disks with MS-DOS drive first.