Installation guide

PowerBook 3400 and PowerBook G3 (1997) 13
Step 8: Gently rotate the top of the keyboard (the end closest to the
display) toward you, laying it face down onto the palm rest.
Step 9: Using the small flat-blade
screwdriver, detach the two
keyboard cables by gently lifting
up their respective connector ears.
Remove the keyboard, and set it
safely aside.
Step 10: If present, grasp the
RAM card by the corners closest to
you (supporting the bottom left
corner over the connector and lift
straight up.
Step 11: Carefully detach the
brightness & speaker cable from its
connector. Remove the screw from
the brightness and speaker grill.
Lift off the grill (the piece under the
up arrow in the picture) until you
feel a slight resistance. STOP!
Keyboard Cable
Connectors
Keyboard
Turned Over
RAM Card
Brightnes
& Speaker
Grill
Screw