Setting Up Your PowerBook Includes setup, expansion, and troubleshooting information for PowerBook computers
K Apple Computer, Inc. © 2000 Apple Computer, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.
Contents 1 Getting Started 7 Plugging In the Computer 8 Connecting the Internal Modem 8 Opening the Display 9 Turning the Computer On 10 Problems Turning the Computer On? 10 Moving Items on the Screen 11 Tips for Using the Trackpad 11 Adjusting the Internal Display 12 Adjusting the Brightness 12 Adjusting the Display Resolution 12 Where to Go From Here 13 Additional Information in Online Help and Apple Web Sites 14 What to Do When You Are Finished Working 16 Put Your PowerBook to Sleep 16 Shut Down Your
For More Information on Keyboard Controls 25 Universal Serial Bus (USB) 26 Connecting and Using a USB Device 26 USB Devices and Battery Power 26 Using Multiple USB Devices at the Same Time 27 For More Information on USB 27 FireWire 28 Connecting FireWire Devices 28 FireWire Devices and Battery Power 29 FireWire Target Disk Mode 29 For More Information on FireWire 29 AirPort Wireless Internet and Networking 30 How AirPort Provides Wireless Internet Access 30 For More Information on AirPort 30 Installing an A
Playing DVD Discs 45 For More Information on Your DVD Drive 45 Infrared (IrDA) 46 Making an Infrared Connection 46 For More Information on Infrared 46 PC Cards 47 Inserting a PC Card 47 Ejecting a PC Card 47 For More Information on PC Cards 47 Ethernet (10/100 Base-T) 48 For More Information on Using Ethernet 48 Security Slot and Keyboard Lock 49 Installing Additional Memory 50 RAM Specifications 50 Maximum RAM Configurations 50 Installing RAM in the Upper RAM Slot 51 Checking to See if Your Computer Recogniz
General Safety Instructions 71 Ergonomics 72 Communications Regulation Information 75 Laser Information 80 High-Risk Activities Warning 80 ENERGY STAR 80 6 Contents
C H A P T E R 1 1 Getting Started Your PowerBook has been designed so that you can set it up quickly and start using it right away. If you have never used a PowerBook or are new to Macintosh computers, read this section for instructions on getting started and where to get more information. If you are an experienced user, you may already know enough to get started. Be sure to look over the information in this book to find out about the new features of this PowerBook.
Plugging In the Computer Plugging in the power adapter recharges the computer’s battery. You should plug in the power adapter in case the battery has been drained during shipping or storage. 1 Plug one end of the power cord into the power adapter and the other end into an outlet. 2 Plug the power adapter plug into the power adapter port (marked with the icon ¯) on the back of the computer.
Opening the Display 1 Push the display release button. 2 Open the display and position it at a comfortable viewing angle.
Turning the Computer On To turn on the computer, press the Power button (®) above the keyboard. ® Power button ® You should hear a tone when you turn on the computer. It takes the computer a few moments to start up. Problems Turning the Computer On? Nothing happens when you press the Power button. m The battery may be drained. Make sure that you plugged in the power adapter, and that the adapter is firmly connected to both the computer and a power source.
Moving Items on the Screen You use your PowerBook trackpad to move items and select items on the screen, much as you use a mouse with a desktop computer. To move the arrow pointer on the screen, slide your finger across the trackpad. To select, click, or double-click an item on the screen, use the trackpad button. ® Trackpad Trackpad button The trackpad is sensitive to how quickly you move your finger. To move the pointer a short distance across the screen, move your finger slowly across the trackpad.
Adjusting the Internal Display Before you begin working with your new PowerBook, you may need to adjust your display so that items on the screen are easy to see. Adjusting the Brightness Use the keys labeled with the ¤ icon to adjust screen brightness. ¤ Brightness controls ® Adjusting the Display Resolution You can increase the size of images on your display by switching from the standard resolution to a scaled resolution. Click the Resolution portion of the Control Strip.
Where to Go From Here That’s everything you need to know to get your PowerBook up and running for the first time. The first time that you turn your computer on, the Macintosh Setup Assistant will take you through the rest of the process of configuring your computer for the first time and setting up for the Internet.
Additional Information in Online Help and Apple Web Sites 14 Chapter 1
Apple Web Site www.apple.com Links to everything Apple. The Apple Store www.apple.com/store The latest Apple hardware, software, and accessories. Apple Support Web Site www.apple.com/support Need extra help? Visit here for product support, software updates, and technical information. Apple PowerBook Web Site www.apple.com/powerbook News and information specifically for PowerBook users.
What to Do When You Are Finished Working When you have finished working with your PowerBook, you have two options. Put Your PowerBook to Sleep If you are only going to be away from your PowerBook for a short period of time, put the computer to sleep. When the computer is in sleep, you can quickly wake it and bypass the startup process. When the computer is in sleep, its screen is dark and appears to be off and a small green light on the case pulsates.
C H A P T E R 2 2 Features of Your PowerBook Your PowerBook has many built-in features and expansion capabilities you can use to customize and expand your PowerBook to fit your needs. These include the following: m Universal Serial Bus (USB) for connecting additional equipment to your PowerBook, such as printers, scanners, joysticks, keyboards, digital cameras, and floppy drives. m FireWire for connecting high-speed equipment, such as digital video cameras and external hard disks.
Basic Features of Your PowerBook Microphone Keyboard lock Sleep indicator - Volume Num Lock key controls — Mute control ¤ Brightness controls Keyboard release tab Built-in speaker ® Power button Keyboard release tab ® Built-in speaker Function key Security slot Expansion bay Battery bay release lever Trackpad 18 Chapter 2 Trackpad button Display release button Expansion bay release lever
¤ Brightness controls - Volume controls Increase or decrease the brightness of your PowerBook display using these keys on your PowerBook keyboard. Increase or decrease the volume of the sound coming from the built-in speakers and sound output port. — Mute control Turns the sound from the PowerBook built-in speakers and sound output port off and on. Expansion bay with a DVD-ROM drive module inserted Dual-function expansion bay that accepts removable modules or a PowerBook battery.
Additional Features of Your PowerBook Battery with LED status lights ¯ √ PC Card slot G Æ - input port - Sound output port 20 Chapter 2 PC Card eject button W G Ethernet port Æ TV out port (10/100Base-T ) √ Sound W ™ adapter port USB ports (2) ™ G Æ ¯ Power - √ - G 1 1 2 ™ modem port W Infrared window 2 FireWire ports (2) W Internal ™ External monitor port Reset button
™ External monitor port Æ TV out port Connect to any external monitor or projection device that uses a VGA-style connector or to any older Macintosh monitor using the video adapter included with your PowerBook. Connect your PowerBook to a television, VCR, or other video device. You can use TV out for presentations or to play DVD-Video on your television. G Ethernet port (10/100 Base-T) Connect to a high-speed 10/100Base-T Ethernet network or connect to another computer and transfer files.
Internal Expansion Capabilities of Your PowerBook Heat shield AirPort antenna cable Processor module Hard disk Optional AirPort Card Additional memory slot Keyboard Ethernet ID label 22 Chapter 2
Optional AirPort Card Installing an AirPort Card in your computer allows access to a wireless network. After removing the heat shield, connect the end of the antenna cable to the AirPort Card and then insert the card into the AirPort Card slot. For instructions, see “Installing an AirPort Card” on page 31. AirPort antenna cable The end of the built-in AirPort antenna attaches to the back of the optional AirPort Card.
Keyboard Controls, Hot Function Keys, and Numeric Keypad You can quickly adjust settings such as volume and screen brightness using the keyboard controls for volume and brightness. Your PowerBook also has six additional keys that you can set up to open your frequently used applications or documents. These keys are known as hot function keys. For example, you can use hot function keys to open your Web browser, word processor, or favorite game.
Using the Embedded Numeric Keypad Most desktop computer keyboards have a numeric keypad in addition to the regular keyboard keys. Your PowerBook keyboard has a numeric keypad incorporated with the standard keyboard keys. Keys used for the numeric keypad have a smaller secondary label. Num Lock key Numeric keypad ® To use the numeric keypad, press the Num Lock key on the keyboard. The green light next to the Num Lock key turns on, indicating that the keypad is active.
Universal Serial Bus (USB) Your PowerBook comes with two USB ports, which you use to connect many different types of external devices, including printers, digital cameras, game pads, joysticks, keyboards and mouse devices, and storage devices. USB makes it easy to connect external equipment. Once you connect the device, it is ready to use. You don’t need to restart or reconfigure your computer.
Using Multiple USB Devices at the Same Time Your PowerBook has two USB ports. If you want to use more than one device on the same USB port, purchase a USB hub. The USB hub connects to an open port on your computer and provides additional USB ports (usually four or seven). ¯ √ √ - G Æ - ™ G W ™ Æ W USB hub For More Information on USB Additional information on USB is available in Mac Help (see page 14). Choose Mac Help from the Help menu and search for “USB.
FireWire Your computer has two FireWire ports. FireWire is a high-speed data system that lets you easily connect and disconnect external devices—such as digital video (DV ) cameras, printers, scanners, and hard disks. You can connect and disconnect FireWire devices without restarting your computer.
FireWire Devices and Battery Power FireWire devices, such as certain external hard disks, that get power from the FireWire connection instead of a separate power adapter can be used with your PowerBook. However, these types of FireWire devices can cause your PowerBook battery to become depleted faster. Whenever you use devices with your computer, it is a good idea to plug in the power adapter.
AirPort Wireless Internet and Networking AirPort offers an easy and affordable way to provide wireless Internet access anywhere in the home, at work, or in the classroom. Instead of using traditional cables, AirPort uses wireless local area network (LAN) technology to provide wireless communication between multiple computers. Through a wireless network you can set up access to the Internet, transfer files, play multiplayer games, and more. Your PowerBook is AirPort-ready.
Installing an AirPort Card You can purchase an AirPort Card from your Apple-authorized dealer or from The Apple Store at www.apple.com/store and install it yourself or have it installed by an Appleauthorized service provider. Warning The AirPort Card has been designed so that you can install it yourself. If, after reading the instructions, you feel uncomfortable about installing the card, you can have an Apple-authorized service provider install it for you.
2 Make sure that the keyboard locking screw is not in the locked position. Your new PowerBook comes with the keyboard unlocked, so unless you or someone else locked the keyboard, you can skip this step. ® 3 32 Chapter 2 Release the keyboard by pulling down on the keyboard release tabs (located to the left of the F1 and F9 keys) until the top portion of the keyboard pops up.
4 Lift the top portion of the PowerBook keyboard up slightly near the top row of keys and pull it back far enough to displace the small tabs that hold the bottom of the keyboard in place. 5 Flip the keyboard over and lay it on the palm rests and trackpad.
6 If your AirPort Card came with the AirPort adapter, remove the metal clip and pull the AirPort Card from the adapter. (The adapter and metal clip are not used with your PowerBook.) AirPort Card AirPort adapter Metal clip 7 Touch a metal surface inside the computer to discharge any static electricity. 8 With a Phillips screwdriver, remove the screws that secure the internal heat shield. Screws Heat shield . 9 34 Chapter 2 Lift up the internal heat shield.
10 Position the AirPort Card with the AirPort ID numbers and bar code facing up and connect the AirPort Card to the end of the antenna cable. Make sure that the connector on the end of the antenna cable is straight before inserting it into the card. AirPort Card connector 11 AirPort Card AirPort antenna cable Slide the card into the connector located just above the PC Card slot. Make sure to slide the card all the way in until you feel that the card is securely attached to the connector.
12 Insert the internal heat shield. When replacing the internal heat shield, make sure it does not cover the plastic tabs for the hard disk and AirPort Card. The plastic tab for the processor module should be placed under the heat shield. Important Heat shield Screws AirPort Card tab Hard disk tab Processor module tab 13 36 Chapter 2 Insert the small metal tabs at the base of the keyboard.
14 Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on the top portion of the keyboard. 15 Let go of the keyboard release tabs to secure the keyboard in place. 16 Replace the PowerBook battery or plug in the power adapter.
External Monitor Support (VGA and S-Video) Your computer has a monitor port that allows you to directly connect a monitor with a VGAstyle adapter or other external video device such as a video projector. If you have an older Macintosh-compatible monitor, you can connect it using the VGA-to-Macintosh video adapter that came with your computer. The TV out port (also known as an S-Video out port) on your computer lets you connect to a television, videocassette recorder ( VCR), or video projection system.
Switching Between Extended Desktop and Video Mirroring Modes By default, your PowerBook starts up in extended desktop mode. You can use the Video Mirroring portion of the Control Strip to make the images on the PowerBook display and the external monitor the same. Video Mirroring Connecting a Television, VCR, or Other Video Device To connect a device to the TV out port: 1 Shut down your computer or put it to sleep and turn off the external device.
Battery and Dual Battery Support When the external power adapter is not connected, your computer draws power from a PowerBook battery in the battery bay or expansion bay. You can also insert a second battery in the expansion bay to double the amount of battery life. Monitoring Battery Charge Level You can determine the charge left in your battery by looking at the battery level indicator lights on the battery itself. The charge can be checked with the battery inserted or outside the PowerBook.
Battery-Saving Tips The amount of work time your PowerBook battery can provide before you need to recharge depends on the equipment you’re using with your computer and the steps you take to conserve power while you work. For example, playing DVD movies, listening to audio CDs, or having certain external devices connected drains the battery more quickly. Battery-saving measures include the following: m Disconnect any bus-powered USB or FireWire devices from the computer.
Expansion Bay Modules Your PowerBook comes with a dual-function expansion bay (on the right side of the computer) that accepts either expansion bay modules such as the DVD drive or a PowerBook battery. The bay on the left side of the computer accepts only PowerBook batteries. You can change modules while the computer is turned on as long as they are not in use. You can purchase additional expansion bay modules such as Zip drives and hard disks.
Ejecting an Expansion Bay Module Place your PowerBook on a hard, flat surface and pull the expansion bay release lever toward you to release the expansion bay. ® Note: The expansion bay can accept the wide DVD-ROM drive module, the narrower PowerBook battery, or third-party modules such as a Zip drive or internal hard disk. When a narrower device is in the expansion bay, a small flap covers the empty part of the bay. When the wider drive module is inserted, the flap folds into the bay.
DVD Drive All the software necessary to use your computer and connect to the Internet is already installed on your PowerBook. ( You need to use the PowerBook CDs that came with your computer only if you are having problems and need to reinstall system software.) However, if you purchased additional software with your PowerBook, you can install or run software from CD and DVD discs using the DVD drive in the expansion bay.
Ejecting a Disc From the DVD Drive You eject a disc by dragging the disc icon to the Trash. When the DVD drive opens, remove the disc. You cannot use the drive button to eject a disc from the DVD drive. If you are unable to eject a disc by dragging its icon to the Trash, try the following: m Quit any applications that may be using the disc. m If that does not work, use the end of a pen to gently press the manual eject button.
Infrared (IrDA) Because your PowerBook is equipped with infrared (IR), you can exchange files and data without using wires. The type of IR used is the industry-standard IR communication method known as IrDA. ¯ √ √ - G Æ ™ - G W ™ Æ W Infrared port You can use infrared to share files with another IrDA-equipped computer, communicate with other infrared devices such as handheld organizers, connect to an infrared network, and even print on an infrared printer.
PC Cards You can expand your computer’s capabilities using the PC Card slot. Your PowerBook has one Type II PC Card slot that accepts Type I and Type II PCMCIA cards, including CardBusformat cards. You can insert a PC Card when your computer is on, off, or in sleep. PC Card eject button ® PC Card slot Inserting a PC Card When inserting a PC Card, make sure the label is facing up and the card is level. You’ll feel some resistance as you slide the card in.
Ethernet (10/100 Base-T) Your computer comes with built-in 10/100 megabit per second (Mbps) twisted-pair Ethernet networking capability, which you can use to connect to a network. ¯ - G Æ ™ - G Æ G Ethernet port W ™ W √ √ Connecting to a network gives you access to other computers. You may be able to store and retrieve information, use network printers, modems, and electronic mail, or connect to the Internet. You can also use Ethernet to share files between two computers or set up a small network.
Security Slot and Keyboard Lock You can purchase a security cable and lock to protect your PowerBook. With a lock, you can secure your computer to a desk or table. Your PowerBook also comes with a keyboard locking mechanism. When the keyboard is locked, users will be unable to easily access the internal components of the computer, including the memory, hard disk, and optional AirPort Card.
Installing Additional Memory Your computer comes with a minimum of 64 megabytes (MB) of Synchronous Dynamic Random-Access Memory (SDRAM) installed in a RAM slot on the bottom of the processor module. On the top of the processor module is another RAM slot you can use to add additional memory to your PowerBook. To avoid damage to your computer, Apple recommends that only an Applecertified technician install additional RAM.
Installing RAM in the Upper RAM Slot 1 Shut down your computer, remove the battery from the expansion bay, and disconnect the power adapter, modem, and any other cables connected to the computer. ® Warning The internal components of your PowerBook may be hot. If you have been using your PowerBook, wait 30 minutes after shutting down your computer to let the internal components cool down before continuing. 2 Make sure that the keyboard locking screw is not in the locked position.
Chapter 2 3 Release the keyboard by pulling down on the keyboard release tabs (located to the left of the F1 and F9 keys) until the top portion of the keyboard pops up. 4 Lift the top portion of the PowerBook keyboard up slightly near the top row of keys and pull it back far enough to displace the small tabs that hold the bottom of the keyboard in place.
5 Flip the keyboard over and lay it on the palm rests and trackpad. 6 Touch a metal surface inside the computer to discharge any static electricity. 7 With a Phillips screwdriver, remove the screws that secure the internal heat shield. Screws Heat shield . 8 Lift up the internal heat shield.
9 Locate the empty RAM expansion slot. RAM expansion slot 10 Hold the RAM expansion card at a 30-degree angle. Line up the notch in the card with the small tab in the RAM expansion slot. Then push the RAM expansion card into the expansion slot. 30 o Note: You may feel some resistance. If you are having trouble inserting the card, try pushing one side at a time.
11 Gently push the RAM expansion card down until the two snaps on either side of the card lock into place. Snap 12 Insert the internal heat shield. When replacing the internal heat shield, make sure it does not cover the plastic tabs for the hard disk and optional AirPort Card. The plastic tab for the processor module should be placed under the heat shield.
Chapter 2 14 Flip the keyboard back on top of the opening in your PowerBook and insert the small tabs at the bottom of the keyboard into the openings in the PowerBook case. 15 Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on the top portion of the keyboard. 16 Let go of the keyboard release tabs to secure the keyboard in place. 17 Replace the PowerBook battery or plug in the power adapter.
Checking to See if Your Computer Recognizes the New Memory After installing additional memory in your PowerBook, you can check to see if the computer recognizes the new memory you installed. To check the amount of built-in memory in your computer, do the following: 1 Start up your computer. 2 When you see the Mac OS desktop, choose About This Computer from the Apple (K) menu. The following window shows the total amount of memory in the computer.
Replacing RAM in the Lower RAM Slot To replace a RAM module in the lower RAM slot located under the processor module, follow these steps: 1 Follow the instructions (starting on page 50) to remove the keyboard and internal heat shield. 2 Remove the screw that secures the processor heat spreader. 3 Locate the small plastic pull tab on the right side of the processor module and gently pull up on the tab until the processor module disconnects from the logic board.
7 Reinsert the processor module. (Make sure the tabs on the side of the module line up with the slots on the logic board.) 8 Press down against the processor module to attach the connector to the logic board, and replace the screw. Replace screw If you have a 2-inch RAM card in the upper slot, remove it before reinserting the processor module. A 2-inch RAM card blocks the area you need to push against to secure the processor module in place.
Removable Hard Disk When the computer is shut down, the internal hard disk can be removed for security or maintenance. Warning To avoid damage to your computer, Apple recommends that only an Applecertified technician remove the internal hard disk. If you attempt to remove the hard disk yourself, any damage you may cause to your equipment will not be covered by the limited warranty on your computer.
4 Use the pull tab to gently remove the hard disk from the computer. 5 Replace the processor module, internal heat shield, and keyboard.
PowerBook Specifications This section provides basic product specifications. For additional information, choose Apple System Profiler from the Apple (K) menu. Additional product specification information is available on the Internet in the Apple Tech Info Library at www.apple.
External Video Modes Supported m External monitor in extended desktop mode: m Up to millions of colors in the following resolutions: 512 x 384, 640 x 480, 640 x 870, 800 x 600, 832 x 624, 1024 x 768, and 1152 x 870 m Up to thousands of colors in the following resolutions: 1280 x 960 and 1280 x 1024 m External monitor in video mirroring mode: Up to millions of colors in the following resolutions: 640 x 480, 800 x 600, and 1024 x 768 Note: Selecting a resolution greater than 1024 x 768 while in video mirrori
C H A P T E R 3 3 Troubleshooting Occasionally you may have problems while working with your PowerBook. Most often they are the result of not having your software properly configured or using applications or software extensions that are not compatible with the version of the Mac OS (system software) installed on your computer.
Problems That Prevent You From Using Your Computer If the computer won’t respond or the pointer won’t move m Press the Command (x) and period keys at the same time and, if a dialog box appears, click Cancel. m If that doesn’t work, hold down the Option and Command (x) keys and then press the Esc key. If a dialog box appears, click Force Quit. Then save your work in any open applications and restart the computer to be sure the problem is entirely cleared up.
If the computer won’t turn on or start up m Make sure the power adapter is plugged into the computer and into a functioning power outlet. ( Your battery may need to be recharged. Press the small button on the side of the battery. You should see one to four lights indicating the battery’s level of charge.) m If that does not work, locate the reset button (see page 20) on the back panel of your computer. Carefully press the button using the tip of a pen.
A P P E N D I X Cleaning, Storage, Safety, and Ergonomic Information Cleaning Your PowerBook Follow these general rules when cleaning the outside of your computer and its components: m Use a damp, soft, lint-free cloth to clean the computer’s exterior. Avoid getting moisture in any openings. m Don’t use aerosol sprays, solvents, or abrasives.
Safety Instructions for Setting Up and Using Your Computer Plugging In the Power Adapter Warning Use only the power adapter that came with your PowerBook computer. Adapters for other electronic devices (including other PowerBook models and other portable computers) may look similar, but they may damage your computer. If your power adapter came equipped with a three-wire grounding plug (a plug that has a third grounding pin), then this plug will fit only a grounded AC outlet.
General Safety Instructions For your own safety and that of your equipment, always take the following precautions.
Ergonomics Keyboard and Trackpad When you use the keyboard and trackpad, your shoulders should be relaxed. Your upper arm and forearm should form an angle that is slightly greater than a right angle, with your wrist and hand in roughly a straight line. This Not this Use a light touch when typing or using the trackpad and keep your hands and fingers relaxed. Avoid rolling your thumbs under your palms. This Not this Change hand positions often to avoid fatigue.
External Mouse If you use an external mouse, position the mouse at the same height as your keyboard and within a comfortable reach. Built-in Display Adjust the angle of the display to minimize glare and reflections from overhead lights and windows. You can adjust the brightness of the screen when you take the computer from one work location to another, or if the lighting in your work area changes. For More Information Go to www.apple.
Communications Regulation Information FCC Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
VCCI Class B Statement Notify Your Telephone Company Some telephone companies require that you notify the local business office when you hook up a modem to their lines. Information You Need in the United States The internal modem complies with Part 68 of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN). If requested, provide this information to your telephone company.
Information You Need in Canada The Industry Canada (IC) label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. The Department does not guarantee the equipment will operate to a user’s satisfaction. Before installing this equipment, make sure that you are permitted to connect to the facilities of the local telecommunications company.
Pour sa propre protection, I’utilisateur doit s’assurer que tous les fils de mise à la terre du secteur, des lignes téléphoniques et les canalisations d’eau métalliques, s’il y en a, soient raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales. Avertissement L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à un service d’inspection des installations électriques ou à un électricien, selon le cas. m Numéro de charge : 0.
For calls that are automatically generated, a total of three call attempts are allowed to a telephone number, with a minimum period between calls of 2 seconds. If the call does not connect after three attempts, 30 minutes must expire before automatic redialing may be initiated. Failure to set the modem (and any associated communications software) to the above settings may result in the modem being non-compliant with Australian telecommunications standards.
Laser Information Making adjustments or performing procedures other than those specified in your equipment’s manual may result in hazardous radiation exposure. Warning Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to the eyes. The use of optical instruments, such as magnifying lenses, with this product increases the potential hazard to your eyes. For your safety, have this equipment serviced only by an Apple-authorized service provider.
