Technical information

Exploded View

PowerBook (FireWire)

PowerBook (FireWire) Reassembly Checksheet

1 Install backup battery (do not connect cable yet).

2 Install PCMCIA cardcage on I/O logic board (4 screws: 2 short, 2 long).

3 Install reset button on I/O logic board.

4 Install RJ-11 cable/phone jack on I/O logic board.

5 Install sound card on I/O logic board.

6 Install I/O logic board on bottom case.

7 Install fan on bottom case.

8 Install modem EMI filter card on stiffener (1 screw).

9 Install stiffener (2 screws).

10 Install screw on I/O logic board near fan.

11 Install nut on back left corner of I/O logic board.

12 Install yoke (1 screw and 1 spring).

13 Install power supply card (2 screws in middle of card).

14 Install I/O EMI shield.

Long

Screws

Short

Screws

Underside of

I/O Logic Board

Reset

Button

RJ11

Cable/

Phone

Jack

Modem

Filter

Screw