Specifications

PowerBook G4 (12-inch 1.5 GHz) Take Apart - 51
DC-to-DC Board
2. Remove the screws from the DC-to-DC board.
Note:
When removing the 4.5-mm long screw, the magnetic latch might draw the
screw toward it. The 13.5-mm long screw has a hex head and requires a needlenose
pliers or socket wrench to remove it.
Replacement Note: When replacing the DC-to-DC board, install the screws in the
order shown.
3. Lift off the EMI strip from the battery connector. Be sure to replace it when installing
the replacement DC-to-DC board.