Specifications

PowerBook G4 (17-inch DLSD/1.67/1.5/1.33GHz) Take Apart -

Keyboard

6. While supporting the keyboard in the top case, verify that the keyboard lays ﬂat and

that all the tabs have seated properly.

Note:

The keyboard will not sit flat if any of the tabs have not seated properly. If the

side tabs are not seating or are binding, check the bottom edge of the keyboard to

verify that all the tabs are seated and the bottom of the keyboard is straight.

7. Verify that the bend-tabs are not caught.

8. Lay the top case ﬂat, and upside down.

9. Pull on the ﬂex cables to verify that they are not bent or caught under the keyboard,

and that they extend to their connectors.

10. Verify that the screw holes align with the screw bosses and install all ten keyboard

screws, starting from the middle and work out.