User`s guide

Audio problems

There is no sound.

m Make sure the volume is turned up.

m Make sure the disc is an audio CD or a portfolio Photo CD with sound.

m Make sure the disc label is towards the door.

m Check all audio connections.

m If you are using headphones, connect the headphones into another sound

source to make sure they work.

m If you are using a high-fidelity amplifier, check whether it is working by

trying another sound source.

The sound is distorted.

m Check the disc for marks, and clean it with a soft cloth, wiping from center

to edge.

m Check if the disc is defective by trying another disc.

Sound from a high-fidelity amplifier is distorted.

m Check that the audio connections are not made to the amplifier Phono

input.

Problems using your PowerCD with a Macintosh

The computer doesn’t seem to know that there is a PowerCD.

m Make sure the PowerCD is turned on and that a disc is inserted.

m Make sure the PowerCD software is installed. (See “Installing the

PowerCD Software on a Macintosh Computer” in Chapter 2.)

m Restart your computer.

m Check that each SCSI device attached to your computer has a unique SCSI

ID number. (See “Setting the SCSI ID Number” in Chapter 2.)

ROUBLESHOOTING