User`s guide

Your computer won’t restart after you’ve copied software for your PowerCD to the
System Folder.
m If you attempt to install the software for your PowerCD without using the
Installer as described in Chapter 2, you may not be able to restart your
computer. Restart using another startup disk and install the software
according to the instructions in Chapter 2.
You insert a CD-ROM disc but its icon does not appear on the Macintosh desktop.
m Make sure the disc label is facing towards the door.
m Make sure the SCSI cable is connected properly.
m Make sure the PowerCD software is installed (as described in Chapter 2).
m Restart the computer.
You can’t open documents on a particular CD-ROM.
m Try opening an application program first, then opening the document.
m Read the manual that came with your CD-ROM disc. Some discs come
with a separate floppy disk containing the program that reads the
information on the disc.
You can’t save changes you make to information on a CD-ROM disc.
m CD-ROM is a read-only medium. That means that information can be read
(retrieved) from it, but not written (stored) on it. You can save the changed
information on a hard disk or floppy disk.
When you insert a disc in your PowerCD, your computer displays the message “This is
not a Macintosh disk: Do you want to initialize it?”
m Make sure the PowerCD software is installed (as described in Chapter 2).
m The disc may use a format that the Macintosh cannot recognize. Exchange
it for a disc that works with your Macintosh.
54
C HAPTER E IGHT