Operation Manual

The Camera Access Welcome message appears briefly, then the QuickTake 200
panel appears.
The QuickTake 200 panel contains two buttons: the Viewer button to view
your camera’s contents and the Upload button to move images from your
computer to your camera. You can also tell at a glance how many images
are stored in your camera.
IMPORTANT When your camera is not connected to the computer or not
turned on, the QuickTake 200 panel is disabled.
You cannot work with your camera’s contents, but by using the panel menus
you can open and edit Camera Access images that have already been
transferred to your computer.
34
Chapter 3
Click to view
camera contents.
Click to move an image from
the computer to the camera.
Number of images in
the camera
Number of images in the
camera does not appear.