Installation manual
Chapter 8 Administering Client Computers 131
Getting USB Device Information
The USB Devices report gets information about Universal Serial Bus devices (scanners,
keyboards, mice, and so forth) connected to the client computer. It can get the
following information from a device:
Product name and ID Â
Vendor name and ID Â
Device speed Â
Bus power amps Â
For more information about the USB Devices report options, see Appendix B, “ Report
Field Denitions Reference,” on page 178 .
Basic information about attached USB devices can also be found in the Devices section
of the System Overview report.
To generate a USB Devices report:
1 Select a computer list in the Remote Desktop window.
2 Select one or more computers in the selected computer list.
3 Choose Report > USB Devices.
4 Select the USB device information desired.
5 To search using new data, select Rebuild Data For Report.
6 Click Get Report.
The newly generated report window appears.
Getting Network Interface Information
The Network Interfaces report gets information for all network interfaces, including
inactive interfaces. It also gets detailed network, output, and Ethernet statistics from
client computers.
The Network Interfaces report can be used to nd network errors or faulty network
equipment, troubleshoot network performance, and query the network settings of
the client computers.
All statistics are refreshed when the client restarts, and address information may
change if your client uses DHCP to get a network address.
For a complete listing of Network Interfaces report options, see Appendix B, “ Report
Field Denitions Reference,” on page 178 .
Basic information about network settings can also be found in the Network and
AirPort section of the System Overview report.