Effects Reference

Chapter 11 Convolution Reverb: Space Designer 131
Envelope and EQ Display
Space Designer’s Envelope and EQ display features two components: the button bar at
the top and the main display (including its parameter bar). The display itself shows either
the envelope being edited or the EQ curve, depending on which button you engage.
Button Bar
The Envelope and EQ display’s button bar includes buttons to switch the main display
between envelopes and the EQ, as well as some function buttons.
 Reset button: Click to reset the currently displayed envelope or EQ to its default values.
 All button: Click to reset all envelopes and the EQ to default values.
 Volume Env button: Click this button to bring the volume envelope to the front of the
main display. The other envelope curves are shown as transparencies in the
background. See “Volume Envelope Parameters” on page 133 for information on the
volume envelope.
 Filter Env button: Click this button to bring the filter envelope to the front of the main
display. The other envelope curves are shown as transparencies in the background.
See “Filter Parameters” on page 134 for information on the filter envelope.
 Density Env button: Click this button to bring the density envelope to the front of the
main display. The other envelope curves are shown as transparencies in the
background. See “Synthesizer Impulse Response Parameters” on page 136 for
information on the density envelope.
Button bar
Main display
Display in EQ viewDisplay in Envelope view
Parameter bar