Effects Reference

Chapter 1 Delay 29
 Crossfeed Left to Right and Crossfeed Right to Left: Use to transfer the feedback signal
of the left channel to the right channel, and vice versa.
 Crossfeed Phase buttons: Use to invert the phase of the crossfed feedback signals.
Tape Delay
The Tape Delay simulates the warm sound of vintage tape echo machines, with the
convenience of easy delay time synchronization to your project tempo.
The Tape Delay is equipped with a highpass and lowpass filter in the feedback loop,
making it easy to create authentic dub echo effects. It also includes an LFO for delay
time modulation. The LFO produces a triangular wave, with adjustable speed and
modulation intensity. You can use it to produce pleasant or unusual chorus effects,
even on long delays.
 Feedback: Determines the amount of delayed and filtered signal that is routed back
to the input of the Tape Delay.
 Freeze: Captures the current delay repeats and sustains them until the Freeze
parameter is released.
 Delay: Sets the current delay time in milliseconds (this parameter is dimmed when
you synchronize the delay time to the project tempo).
 Tempo: Sets the current delay time in beats per minute (this parameter is dimmed
when you synchronize the delay time to the project tempo).
 Sync button: Switch this on to synchronize delay repeats to the project tempo
(including tempo changes).
 Note buttons: Click to set the grid resolution for the delay time, in note durations.
 Groove slider: Determines the proximity of every second delay repeat to the absolute
grid position (how close every second delay repeat is).
 Distortion Level (Extended Parameter): Determines the level of the distorted (tape
saturation) signal.
 Low Cut and High Cut: Frequencies below the Low Cut value and above the High Cut
value are filtered out of the source signal.