User manual
Table Of Contents
- Soundtrack Pro User Manual
- Contents
- An Introduction to Soundtrack Pro
- Setting Up Your System
- The Soundtrack Pro Interface
- Getting Started With Soundtrack Pro
- Working With Multitrack Projects
- Working in the Timeline
- Moving Around in the Timeline
- Working With Tracks, Busses, and Outputs in the Timeline
- Editing Audio Clips in the Timeline
- Selecting Audio Clips
- Cutting, Copying, and Pasting Audio Clips
- Moving Audio Clips
- Snapping Clips to Clips on Adjacent Tracks
- Resizing Audio Clips
- Creating Crossfades Between Audio Clips
- Truncating Overlapping Audio Clips
- Splitting and Joining Audio Clips
- Transposing Tagged Audio Clips
- Changing the Offset of an Audio Clip
- Changing a Clip’s Playback Mode
- Replacing the Source Audio in a Clip
- Removing Audio Clips
- Working With Markers
- Working in the Mixer
- Steps in Mixing
- Working With Channel Strips in the Mixer
- Adding Channel Strips to the Mixer
- Selecting Channel Strips
- Reordering Channel Strips
- Copying Channel Strips
- Setting Channel Strip Volume Levels
- Setting Channel Strip Pan Position
- Setting Channel Strip Output
- Muting and Soloing Channel Strips
- Enabling Track Channel Strips for Recording
- Renaming Channel Strips
- Changing a Channel Strip Icon
- Showing and Hiding Sections of the Mixer
- Using the Channel Strip Level Meters
- Removing Channel Strips
- Working With Effects and Sends in the Mixer
- Setting the Overall Project Volume Level
- Listening to a Temporary Mono Mix
- Recording Audio in the Mixer
- Recording Automation in the Mixer
- Creating Multiple Mixes
- Things to Keep in Mind While Mixing
- Working in the Waveform Editor
- Getting Started With Audio File Projects
- Supported Audio File Formats
- Creating and Opening Audio File Projects
- Closing Audio File Projects
- Saving Audio File Projects
- Setting the Time Ruler Units in the Waveform Display
- Choosing the Sample Units in the Waveform Display
- Zooming In and Out in the Waveform Editor
- Using the Global Waveform View
- Viewing an Audio File in Spectrum View
- Playing Audio Files in the Waveform Editor
- Editing Audio Files in the Waveform Editor
- Processing Audio Files
- Working With Actions
- Applying Actions
- Editing Actions
- Turning Actions On and Off
- Reordering Actions
- Using the Action Insert Bar
- Reversing the Order of the Actions List
- Flattening Actions
- Comparing the Project With and Without Actions
- Comparing the Last Two Actions
- Deleting Actions
- Limitations of Actions That Change the File’s Length
- Analyzing an Audio File
- Using Markers in the Waveform Editor
- Scripting Actions in the Waveform Editor
- Getting Started With Audio File Projects
- Working With Video in Soundtrack Pro
- Working With Audio Effects
- Realtime and Processing Effects
- Audio Effects Included With Soundtrack Pro
- Working With Realtime Effects
- Working in the Effects Tab
- Adding Realtime Effects
- Adjusting Realtime Effect Parameters
- Chaining and Reordering Realtime Effects
- Bypassing Realtime Effects
- Adding Sends to Tracks
- Reordering Sends
- Choosing the Bus to Which a Send Is Routed
- Adjusting Send Volume
- Adjusting Send Pan Position
- Bypassing Sends
- Automating Realtime Effect Parameters
- Resetting Realtime Effects to Their Default Settings
- Removing Realtime Effects
- Advanced Settings for Realtime Effects
- Working With Processing Effects
- Working With Effect Presets
- Working With Automation
- Working With Envelopes
- Track, Bus, and Output Envelopes
- Master Envelopes
- Adding Envelope Points
- Selecting Envelope Points
- Moving Envelope Points
- Changing the Values of Envelope Points Numerically
- Changing the Position of Envelope Points Numerically
- Viewing and Editing Envelope Point Details
- Nudging Envelope Points
- Cutting, Copying, and Pasting Envelope Points
- Deleting Envelope Points
- Automating Effect and Send Parameters
- Recording Automation Data
- Working With Timeslices
- Working With Envelopes
- Recording Audio in Soundtrack Pro
- Using Control Surfaces With Soundtrack Pro
- Exporting Multitrack Projects
- Using Soundtrack Pro With Apple Professional Applications
- Using Apple Loops Utility
- Soundtrack Pro Keyboard Shortcuts
- Audio Basics
- Solutions to Common Problems and Customer Support
- Index
188 Chapter 8 Working With Video in Soundtrack Pro
To switch off output to an external video output device:
m Choose View > Show > Show External Video.
If you have added the Video Out button to the Toolbar, you can also click the button to
switch off the device.
To switch on output to an external video output device:
m Choose View > Show > Show External Video.
If you have added the Video Out button to the Toolbar, you can also click the button to
switch on output to the device.
A video output device can only be controlled by one application at a time. If you hide
Soundtrack Pro or bring another application to the foreground while playing video
through a video output device, Soundtrack Pro maintains control of the output device
and continues playing. If you hide Soundtrack Pro or bring another application to the
foreground when video is not playing through a video output device, Soundtrack Pro
releases control of the output device.
Viewing Video Details
You can view details of a video file, including the video file’s name, dimensions, length,
frame rate, and other information. You can view details of a video file that has been
added to a project, or a video file in the Media and Effects Manager.
To view details of a video file:
1 If the Details tab is not visible, click Details to make it active.
2 Select the video file in the Media and Effects Manager, or select the video clip in the
Timeline.
The video file’s information appears in the Details tab.
You can preview a video file in the Details tab before you add it to a project.