User manual
Table Of Contents
- Soundtrack Pro User Manual
- Contents
- An Introduction to Soundtrack Pro
- Setting Up Your System
- The Soundtrack Pro Interface
- Getting Started With Soundtrack Pro
- Working With Multitrack Projects
- Working in the Timeline
- Moving Around in the Timeline
- Working With Tracks, Busses, and Outputs in the Timeline
- Editing Audio Clips in the Timeline
- Selecting Audio Clips
- Cutting, Copying, and Pasting Audio Clips
- Moving Audio Clips
- Snapping Clips to Clips on Adjacent Tracks
- Resizing Audio Clips
- Creating Crossfades Between Audio Clips
- Truncating Overlapping Audio Clips
- Splitting and Joining Audio Clips
- Transposing Tagged Audio Clips
- Changing the Offset of an Audio Clip
- Changing a Clip’s Playback Mode
- Replacing the Source Audio in a Clip
- Removing Audio Clips
- Working With Markers
- Working in the Mixer
- Steps in Mixing
- Working With Channel Strips in the Mixer
- Adding Channel Strips to the Mixer
- Selecting Channel Strips
- Reordering Channel Strips
- Copying Channel Strips
- Setting Channel Strip Volume Levels
- Setting Channel Strip Pan Position
- Setting Channel Strip Output
- Muting and Soloing Channel Strips
- Enabling Track Channel Strips for Recording
- Renaming Channel Strips
- Changing a Channel Strip Icon
- Showing and Hiding Sections of the Mixer
- Using the Channel Strip Level Meters
- Removing Channel Strips
- Working With Effects and Sends in the Mixer
- Setting the Overall Project Volume Level
- Listening to a Temporary Mono Mix
- Recording Audio in the Mixer
- Recording Automation in the Mixer
- Creating Multiple Mixes
- Things to Keep in Mind While Mixing
- Working in the Waveform Editor
- Getting Started With Audio File Projects
- Supported Audio File Formats
- Creating and Opening Audio File Projects
- Closing Audio File Projects
- Saving Audio File Projects
- Setting the Time Ruler Units in the Waveform Display
- Choosing the Sample Units in the Waveform Display
- Zooming In and Out in the Waveform Editor
- Using the Global Waveform View
- Viewing an Audio File in Spectrum View
- Playing Audio Files in the Waveform Editor
- Editing Audio Files in the Waveform Editor
- Processing Audio Files
- Working With Actions
- Applying Actions
- Editing Actions
- Turning Actions On and Off
- Reordering Actions
- Using the Action Insert Bar
- Reversing the Order of the Actions List
- Flattening Actions
- Comparing the Project With and Without Actions
- Comparing the Last Two Actions
- Deleting Actions
- Limitations of Actions That Change the File’s Length
- Analyzing an Audio File
- Using Markers in the Waveform Editor
- Scripting Actions in the Waveform Editor
- Getting Started With Audio File Projects
- Working With Video in Soundtrack Pro
- Working With Audio Effects
- Realtime and Processing Effects
- Audio Effects Included With Soundtrack Pro
- Working With Realtime Effects
- Working in the Effects Tab
- Adding Realtime Effects
- Adjusting Realtime Effect Parameters
- Chaining and Reordering Realtime Effects
- Bypassing Realtime Effects
- Adding Sends to Tracks
- Reordering Sends
- Choosing the Bus to Which a Send Is Routed
- Adjusting Send Volume
- Adjusting Send Pan Position
- Bypassing Sends
- Automating Realtime Effect Parameters
- Resetting Realtime Effects to Their Default Settings
- Removing Realtime Effects
- Advanced Settings for Realtime Effects
- Working With Processing Effects
- Working With Effect Presets
- Working With Automation
- Working With Envelopes
- Track, Bus, and Output Envelopes
- Master Envelopes
- Adding Envelope Points
- Selecting Envelope Points
- Moving Envelope Points
- Changing the Values of Envelope Points Numerically
- Changing the Position of Envelope Points Numerically
- Viewing and Editing Envelope Point Details
- Nudging Envelope Points
- Cutting, Copying, and Pasting Envelope Points
- Deleting Envelope Points
- Automating Effect and Send Parameters
- Recording Automation Data
- Working With Timeslices
- Working With Envelopes
- Recording Audio in Soundtrack Pro
- Using Control Surfaces With Soundtrack Pro
- Exporting Multitrack Projects
- Using Soundtrack Pro With Apple Professional Applications
- Using Apple Loops Utility
- Soundtrack Pro Keyboard Shortcuts
- Audio Basics
- Solutions to Common Problems and Customer Support
- Index
Appendix D
Solutions to Common Problems and Customer Support
295
8
Visually compare the original track and the newly recorded track. Zoom in to identify a
place where the tracks have identical waveforms but are not lined up. Set the playhead
at the corresponding identical points on the two waveforms and subtract the two
Beats field values. This is the latency in milliseconds. If the recorded audio is late (to the
right), you enter a positive value; if it’s early (to the left), you enter a negative value. For
example, if the location in beats of the selected point in the source loop is 1.2.002 and
the location in beats of the corresponding point in the recording is 1.2.008, the latency
is 6 milliseconds.
9
Enter the latency value in the Recording Preferences pane.
10
Mute the recorded track and test record the loop again to make sure the latency
is eliminated.
Calling AppleCare Support
Included in your Soundtrack Pro package is documentation about the support options
available from Apple. Several levels of support are available, depending on your needs.
Whatever your issue, it’s a good idea to have the following information immediately
available. The more of this information you have ready to give to the support agents,
the faster they will be able to address your issue.
Â
The registration number that came with Soundtrack Pro. This number is different
from the software serial number that is used to activate your copy of Soundtrack Pro.
Â
Which version of Mac OS X you have installed. This information is available by
choosing About This Mac from the Apple menu.
Â
The version of Soundtrack Pro you have installed, including updates if applicable. The
version number can be viewed by choosing Soundtrack Pro > About Soundtrack Pro.
Â
The model of computer you are using
Â
How much RAM is installed in your computer, and how much is available to
Soundtrack Pro. You can find out how much RAM is installed by choosing About This
Mac from the Apple menu in the Finder.
Â
What other third-party hardware is connected to or installed in the computer, and
who are the manufacturers. Include hard disks, video cards, and so on.
Â
Any third-party plug-ins or other software installed along with Soundtrack Pro
AppleCare Support can be reached online at:
http://www.apple.com/support/soundtrackpro
42931SUP Page 295 Friday, March 4, 2005 7:45 PM