Manualshelf

User guide

ManualsBrandsApple ManualsSoftwareXserve (Early 2008) DIY Procedure for Front Panel Board
1234567
Xserve (Late 2006/Early 2008) Front Panel Board Replacement Instructions 3
Removing the Installed Front Panel Board
Note: Before removing the front panel board, you must remove the locking mechanism rod.
Locking Mechanism Rod
Pull back the latch to release the gear end of the locking mechanism rod. 1.
Tilt up the gear end of the rod and remove the rod from the server. 2.
Front Panel Board
Locate the front panel board. 1.