Cut Sheet

7000S Series Connectors
Application
• To ground and secure EMT raceways to boxes and enclosures.
Features
• Male hub threads — NPS.
• Available with insulated throat.
• Concretetight.
• Insulated throat connector rated 90 °C.
Material/Finish
• Body and nut: steel
• Steel/zinc plated
Certifications and Compliances
• UL Standard: 514B
• UL Listed: E14815, E14814
• cUL Listed: E14815
• CSA Standard: C22.2 No. 18.3
• NEMA: FB-1
Trade Size
(Inches)
Catalog
Number
Insulated Throat
Catalog Number
Dimensions in Inches/Millimeters
Weight Lbs./Kgs.
Per 100Body Length Maximum Diameter Thread Length
1/2 7050S 7050ST 1.13/28.7 1.06/26.9 0.38/9.7 15.00/6.80
3/4 7075S 7075ST 1.03/26.2 1.25/31.8 0.44/11.2 21.00/9.53
1 7100S 7100ST 1.25/31.8 1.56/39.6 0.44/11.2 32.00/14.51
1-1/4 7125S 7125ST 1.81/46.0 2.00/50.8 0.56/14.2 72.00/32.66
1-1/2 7150S 7150ST 2.00/50.8 2.19/55.6 0.56/14.2 85.00/38.56
2 7200S 7200ST 2.25/57.2 2.69/68.3 0.69/17.5 124.00/56.25
2-1/2 * 7250S 7250ST 2.38/60.5 3.34/84.8 0.88/22.4 160.00/72.57
3 * 7300S 7300ST 2.88/73.2 4.00/101.6 0.88/22.4 265.00/120.20
3-1/2 * 7350S 7350ST 3.00/76.2 4.50/114.3 1.00/25.4 425.00/192.78
4 * 7400S 7400ST 3.19/81.0 5.06/128.5 1.00/25.4 600.00/272.16
* Rated for steel EMT, aluminum and steel RMC, and steel IMC.
7050S – 7400S
Commercial Products
COMMERCIAL PRODUCTS: EMT FITTINGS
Visit our website at www.appletonelec.com or contact us at [phone].
© September 2010
1579
Steel EMT Compression Connectors