Cut Sheet

DC-5500: Duplex, Single Screw, Clamp Type
Application
• To make a termination of fl exible metal conduit to a knockout or
unthreaded slip hole in a dry location box or enclosure.
Features
• Furnished with locknut.
• Male hub threads — NPS.
• Combination head screw.
Standard Material
• Zinc diecast
Certifications and Compliances
• UL Standard: 514B
• UL Listed: E32539
• CSA Standard: C22.2 No. 18.3
• CSA Certifi ed: 208044
• NEMA: FB-1
Note:
• DC-5500 listed for use with 0.38in./9.7mm. regular and reduced wall steel
an aluminum flexible metal conduit.
• DC-5500 listed for use with 14-2 AWG (nominal O.D. 0.46in./11.7mm.)
to 10-3 AWG (nominal O.D. 0.50in./12.7mm.) steel armored cable
(AC); 14-2 AWG (nominal O.D. 0.48in./12.2mm.) to 10-2 AWG (nominal
O.D. 0.58in./14.7) aluminum armored cable (AC); 14-2 AWG (nominal
O.D. 0.47in./11.9mm.) to 10-3 AWG (nominal O.D. 0.60in./15.2mm.)
steel interlocking metal-clad cable (MCI); 14-2 AWG (nominal O.D.
0.47in./11.9mm.) to 10-3 AWG (nominal O.D. 0.61in./15.5mm.)
aluminum interlocking metal-clad cable (MCI); 14-2 AWG (nominal O.D.
0.37in./9.4mm.) to 10-3 AWG (nominal O.D. 0.50in./12.7mm.) aluminum
interlocking metal-clad cable, grounding type (MCI-A).
C-510: Two Screw Connectors
Application
• To terminate regular wall steel or aluminum fl exible conduit to a
1⁄2” knockout in a dry box or enclosure.
Features
• End stopped.
• Male hub threads — NPS.
• Furnished with locknut.
• Combination head screw.
Standard Material
• Zinc diecast
Certifications and Compliances
• UL Standard: 514B
• UL Listed: E32539
• CSA Standard: C22.2 No. 18.3
• CSA Certifi ed: 208044
• NEMA: FB-1
Note:
• C-510 listed for use with 3⁄8” regular and reduced wall steel an aluminum
flexible metal conduit.
• C-510 listed for use with 14-2 AWG (nominal O.D. 0.46in./11.7mm.) to
10-2 AWG (nominal O.D. 0.60in./15.2mm.) steel armored cable (AC);
14-2 AWG (nominal O.D. 0.48in./12.2mm.) to 10-2 AWG (nominal O.D.
0.57in./14.5mm.) aluminum armored cable (AC); 14-2 AWG (nominal
O.D. 0.47in/11.9mm.) to 10-3 AWG (nominal O.D. 0.60in./15.2mm.)
steel interlocking metal-clad cable (MCI); 14-2 AWG (nominal O.D.
0.47in/11.9mm.) to 10-3 AWG (nominal O.D. 0.61in./ 15.5mm.)
aluminum interlocking metal-clad cable (MCI); 14-2 AWG (nominal O.D.
0.37in./9.4mm.) to 10-3 AWG (nominal O.D. 0.50in./12.7mm.) aluminum
interlocking metal-clad cable, grounding type (MCI-A).
DC-5500
Trade Size
(Inches)
Catalog
Number
Dimensions in Inches/Millimeters
Body
Length
Thread
Length Diameter
3/8 (1/2
knockout)
DC-5500 1.50/38.1 0.43/10.9 0.85/21.6
C-510
Trade Size
(Inches)
Catalog
Number
Dimensions in Inches/Millimeters
Body
Length
Thread
Length Diameter
3/8 (1/2
knockout)
C-510 0.87/22.1 0.37/9.4 0.91/23.1
Commercial Products
COMMERCIAL PRODUCTS: CORD AND CABLE FITTINGS
Visit our website at www.appletonelec.com or contact us at [phone].
© September 2010
1707
Zinc Cable and Conduit Connectors
For Armored Cable, Flexible Metal Conduit and Metal Clad Cable