Cut Sheet

ManualsBrandsAppleton ManualsPin & Sleeve PlugsClamping Ring Plug, 60 Amp, 3-Pole, 3-Wire

Applications

• Designed to supply power to portable or xed electrical

equipment such as motor generator units, welders, pumps,

compressors, cellular relay stations, and similar apparatus.

• Ideal for use on shipping docks, ports, and other “ship to shore”

applications.

• Suitable for use in locations where a weatherproof enclosure is

required.

• Rough usage construction.

Features

• Available in 30, 60, 100, 150, 200, and 400 Amp units.

• Available in two grounding styles: Style 1 (shell only) and Style 2

(shell and extra pole).

• Neoprene bushing compressed by cable collar prevents

entrance of water. Bushing is highly resistant to hydrocarbon

deterioration and is self-extinguishing.

• Locking screw and slot prevents plug cable collar from “backing

off.”

• Contacts exert constant pressure along entire contact surface

and provide electrical continuity.

• Suitable for use from -40 °F/-40 °C to 225 °F/107 °C.

• Insulating blocks provide greatest dielectric and mechanical

strength and lowest arc tracking.

• Positive polarization: only plugs and receptacles of same style,

number of poles and ampere rating can be used together.

• Circuit breaking: in 30, 60, 100, and 200 Amp units, any arcing

created as line and load terminals disengage is safely conned

deep within terminal cavities. Plugs may be withdrawn in an

emergency under full rated loads without separate disconnect

switches (400 Amp plug is for disconnecting use only; not for

current rupturing).

• 30, 60, 100, and 150 Amp Powertite

plugs also suitable for

classied locations when used with Appleton EBR, EBRH, JBR,

MD2SR, or DBR explosion-proof interlocking receptacles.

• Controlled length contacts ensure that ground makes rst and

breaks last for added safety.

Standard Materials

• Plug, receptacle, connector and mounting box housings:

copperfree (4/10 of 1% max.) aluminum

• Insulating blocks: glass lled polyester

Standard Finishes

• Aluminum plug, receptacle, connector and mounting box

housings: epoxy powder coat

• Insulating blocks and contacts: natural nish

Options

• See Illustrated Options

Certifications and Compliances

• UL Standard: UL 1682, UL 1686, UL 50E

• UL Listed: E145916, E145917

• CSA Standard: C22.2 No. 182.1

• CSA Certied: 065179

• NEMA 4X (30, 60, 100, 150, and 200 Amp)

• NEMA Conguration: FB11

Summary of content (3 pages)

PAGE 1
Powertite® Series Pin and Sleeve Plugs, Connectors and Receptacles Applications 30 and 60 Amp 100 and 150 Amp 200 Amp 400 Amp Plugs and Receptacles • Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. • Ideal for use on shipping docks, ports, and other “ship to shore” applications. • Suitable for use in locations where a weatherproof enclosure is required.
PAGE 2
Powertite® 60 Amp Pin and Sleeve Plugs and Receptacles 600 Vac, 250 Vdc, 50-400 Hz Pressure Wire Terminals – Wire Recess Diameter: .312”. Wire Size Range: #6—#2 Building; #6—#4 Extra Flex.
PAGE 3
Powertite® 60 Amp Pin and Sleeve Connectors and Plugs 600 Vac, 250 Vdc, 50-400 Hz Pressure Wire Terminals – Wire Recess Diameter: .312”. Wire Size Range: #6—#2 Building; #6—#4 Extra Flex. NEMA 3, 3R, 4, 4X Plugs and Receptacles Style 1 (Shell Only) Style 2 (Shell and Extra Pole) Wire/Pole 2W, 2P Connector Body Metallic Clamping Only Ring Plug ‡ Connector/Plug Cable Dia. (Inches) ARC6022BC .500 to 1.250 ACP6022BC 3W, 3P ARC6033BC ACP6033BC .500 to 1.250 4W, 4P ARC6044BC ACP6044BC .500 to 1.