Manualshelf

ARRA Compliant

ManualsBrandsAppleton ManualsConduit BodiesConduit Body, Type: T, 1-1/4", Form 7, Grayloy Iron
12
MANUFACTURED GOODS/SUBSTANTIAL TRANSFORMATION
BUY AMERICAN PROVISIONS OF ARRA SECTION 1605
DATE: June 22, 2011
IRON/ALUMINUM
EGS Electrical Group has an Iron and Aluminum Foundry located in South Milwaukee, WI. The iron or aluminum for the products listed on the attached page
were cast in this facility.
STEEL
EGS Electrical Group has a manufacturing plant located in Stephenville, TX. Steel Box products listed on the attached page were stamped in this facility from
US Steel.
SUBSTANTIAL TRANSFORMATION
While the finishing and minor assembly was performed in our Mexico facilty, substantial transformation of the product occurred during the casting or stamping
process in the United States as demonstrated in the questionnaire below.
Question for Determining Whether Substantial Transformation Has Occurred in the U.S.
QUESTION YES NO
1. Were all of the components of the manufactured good manufactured in the United States, and were all of the components assembled
into the final product in the U.S.? (If the answer is yes, then this is clearly manufactured in the U.S. and the inquiry is complete)
X
2. Was there a change in character or use of the good or the components in America? (these questions are asked about the finished good
as a whole, not about each individual component)
X
a. Was there a change in the physical and/or chemical properties or characteristics designed to alter the functionality of the good? X
b. Did the manufacturing or processing operation result in a change of a product(s) with one use into a product with a different
use?
X
c. Did the manufacturing or processing operation result in the narrowing of the range of possible uses of a multi-use product? X
3. Were the processes performed in the U.S. (including but not limited to assembly) complex and meaningful? X
a. Did the processes take a substantial amount of time? X
b. Were the processes costly? X
c. Did the processes require particular high level skills? X
d. Did the processes require a number of different operations? X
e. Was substantial value added in the processes? X
As substantial transformation occurred in the United States, these products comply with the Buy American Provisions of the American Recovery and
Reinvestment Act (Section 1605).
Regards,
Traci L. Grever
Director, Logistics and Trade Compliance
EGS Electrical Group
NOTE: ARRA eligibility is subject to change without notice.
Page
1
of
2
ARRA Compliance Certificate
6/22/2011
https://www.egsegonline.com/egs/egsapp74.pgm?rnd=890

Summary of content (2 pages)