Cut Sheet

Plugs and Receptacles
Plugs and RecePtacles: ORdinaRy lOcatiOn
Visit our website at www.appletonelec.com or contact us at [phone].
© November 2011
801
Powertite
®
400 Amp Pin and Sleeve Connectors and Plugs
600 Vac, 250 Vdc, 50-400 Hz.
Wire Recess Diameter: .84” or 1.25”. Wire Size Range: 400MCM—1000MCM. Solder Wire Terminals.
Wire Recess Dia. (Inches) Grounding Style Wire/Pole Connector Body Only Plug Only Cable Dia. (Inches)
0.84

Style 1
(Shell Only)
3W, 3P ARC40033E AP40033E 1.875 to 2.500
4W, 4P ARC40044E AP40044E 1.875 to 2.500
Style 2
(Shell and Extra Pole)
2W, 3P ARC40023E AP40023E 1.875 to 2.500
3W, 4P ARC40034E AP40034E 1.875 to 2.500
1.25
Style 1
(Shell Only)
3W, 3P
ARC40133F AP40133F 2.500 to 3.000
ARC40133G AP40133G 3.000 to 3.500
4W, 4P
ARC40144F AP40144F 2.500 to 3.000
ARC40144G AP40144G 3.000 to 3.500
Style 2
(Shell and Extra Pole)
2W, 3P
ARC40123F AP40123F 2.500 to 3.000
ARC40123G AP40123G 3.000 to 3.500
3W, 4P
ARC40134F AP40134F 2.500 to 3.000
ARC40134G AP40134G 3.000 to 3.500
Solder wire terminals standard on all models.
For Reverse Service add suffix -RS to Catalog Number.
For Special Polarization add suffix -P4 to Catalog Number.
Pin and Sleeve Design
Energized contacts deeply recessed to reduce danger of
accidental touching, minimize possibility of exposed arcs. Insulator
quenches arcing, and is resistant to abnormal heat and to fire.
Plug mechanical cable clamps provide strain relief at conductor
connections, allow easy cable replacement.
 Pressure terminal kits available for .84 wire recess size only to convert solder terminal to pressure terminal. See Replacement Parts page.