Cut Sheet

ManualsBrandsAppleton ManualsExplosion-ProofAPP CM2 EMER 64W PLT C

Code•Master

™

2 Emergency PLT Factory Sealed Luminaires

Explosionproof, Dust-Ignitionproof

52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.

Applications

• Ideal for use in chemical and petrochemical plants, such as

manufacturers of plastics, paints and thinners; in reneries; and

in other process areas where ignitable vapors, dust, moisture

and corrosive elements may be present.

• Suitable for use in wet locations.

Features

• Auxiliary (emergency) lighting should be used to provide a

lighted means of egress for personnel in walkways, catwalks,

stairs, doorways, tunnels, ramps and aisles.

• Auxiliary (emergency) lighting should be used to provide “instant

on” illumination during power failures.

• Arrangement of heat-producing components results in more

efcient heat dissipation for cooler xture operation.

• Safe, easy servicing without disconnecting any wiring. Patented

“wireless” design means the threading of the xture unit onto

mounting hood makes electrical connection. This allows for the

xture unit to easily thread off mounting hood for convenient

servicing or for immediate replacement with a “stand-by” unit.

Only wiring required is attaching two wires to connection block

in mounting hood.

• Connection block is easily wired: (a) loosen two screws; (b)

make wire connections; and (c) reposition connection block.

• Acme double-lead threads speed installation and xture

removal from mounting hood – only half as many turns are

required as for single-lead threads. The threads do not stick or

gall, eliminating the troublesome problems often encountered

with single-lead threads during xture unit removal.

• All threaded joints are ame-tight.

• Factory sealed. External seals not required.

• Fluorescent light source reduces energy costs.

• Fluorescent lamp life of 10,000 hours reduces relamping costs

compared to incandescent.

• Strategic location of lamp sockets in combination with the

interior prism design of the glass globe provides optimum light

distribution and control.

• Superior corrosion resistance with epoxy powder coat nish.

• Choice of mountings: pendant, ceiling, bracket and stanchion.

• Fiberglass-reinforced polyester reectors in standard

dome, deep dome or 30° angle are ideal in installations

where luminaire is subject to exceptionally severe corrosive

atmospheres. The high bay aluminum reector is designed for

installations where mounting height work planes range from

6 to 9 m (20 to 30 ft).

• Optional guards protect globes from damage. Guards secure to

xture with three screws.

• Fixture (52, 64 or 84 W) is available for semi-continuous

operation (one AC ballast permits two-lamp illumination when

power is on and one battery pack permits one-lamp illumination

when AC power is interrupted).

• Minimum operating temperature: 0 °C (32 °F).

• Maximum operating temperature: 40 °C (104 °F).

Battery Pack Information

• Long life, high temperature, nickel-cadmium (Ni-Cad) battery.

• Dual voltage (120/277 V, 60 Hz) solid state charger on open

circuit board.

• Five-year life expectancy.

• Wiring instructions for “Push-To-Test” button are supplied

with xture.

• Remote EEFDB factory sealed “Push-To-Test” station is

available to verify emergency operation (order separately).

• Red indicator light is provided with each battery pack to

indicate when the battery is charging.

Standard Materials

• Ballast bodies, guards and pendant mounting hoods:

copperfree (4/10 of 1% max.) aluminum

• Ceiling, bracket and stanchion mounting hoods: sand-cast

copperfree (4/10 of 1% max.) aluminum

• Reectors: aluminum or berglass reinforced polyester

Standard Finishes

• Ballast bodies, guards and mounting hoods: epoxy powder

coat nish, electrostatically applied for complete, uniform

corrosion protection

Options

• Fuse kit CF2 for eld installation.

NEC Certifications and Compliances

• UL Standard: UL 924, UL 844, UL 1598

• UL Listed: E165014

NEC:

Class I, Division 1 and 2, Groups C, D

Class II, Division 1 and 2, Groups E, F, G

Class III

NEMA 4X

Marine Type Electric Fixtures

NEC:

Outside Type (Salt Water)

Suitable for use in Wet Locations

NFPA101, Life Safety Code

Illustrated Features

FLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF

Visit our website at www.emerson.com or contact us at (800) 621-1506.

487

Summary of content (9 pages)

PAGE 1
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.
PAGE 2
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.
PAGE 3
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.
PAGE 4
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.
PAGE 5
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit.
PAGE 6
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof 52 W, 64 W, 84 W Fluorescent. For Use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Marine Type Electric Fixtures NEC: Outside Type (Salt Water) Suitable for use in Wet Locations NFPA101, Life Safety Code Dimensions in Millimeters (Inches) Pendant Ceiling Bracket 9.9 (.390) 116.3 (4.58) Dia. 10.4 (0.41)Dia. 62.5 (2.
PAGE 7
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof * Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34.
PAGE 8
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof * Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34.
PAGE 9
Code•Master™ 2 Emergency PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof * Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34.