Cut Sheet
Table Of Contents
- Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
- Straight Liquidtight Strain Relief Cord and Cable Connectors
- 90° Liquidtight Strain Relief Cord and Cable Connectors
- Replacement Glands for Aluminum and Steel CG and CG90 Connectors
- Wire Mesh Strain Relief for Aluminum Cord Connectors
- Wire Mesh Strain Relief for Steel Cord Connectors
Aluminum
Straight 90°
Steel
Straight 90°
Wire Mesh Strain Relief for Cord Connectors
A
P
P
L
E
T
O
N
E
L
E
C
T
R
I
C
CORD GRIP
CATALOG NUMBER
CG-6275
CABLE DIAMETER
RANGE
.625 - .750
MIN. MAX.
LISTED 972H
5
0
1
4
1
0
-
1
6
Color coded label
* Teflon is a registered trademark of E.I. DuPont de Nemours and Co.
Application
• Provide a liquidtight and strain relief termination for exible type
neoprene, hypalon, and PVC jacketed power or control cord
and cable.
• For use in wet or dry locations sealing electrical connections
against dust and dirt, oil, water or other atmosphere containing
moisture.
Features
• Available in straight or 90°, aluminum or steel construction
to meet the requirements of rugged service on all types of
equipment and in all non-hazardous areas.
• Color coded identication label clearly states the catalog
number and minimum-maximum cable diameter range for
which the connector is designed.
• Neoprene sealing grommet rmly but safely grips cable
jacket providing strain relief while protecting internal wiring
connections against external tension on cable or cord.
• Steel or Teon* washer reduces friction between grommet and
connector cap providing even pressure distribution, eliminating
leakage resulting from grommet distortion.
• Large aluminum connectors 1-1/2” thru 4” and all steel
connectors are constructed with hex head cap.
• For particularly harsh applications, wire mesh strain reliefs may
be used with cord and cable connectors.
• CG Series in aluminum construction is available in straight type
from 1/4” thru 4”, 90° type from 3/8” thru 1-1/4”.
• CG Series in steel construction is available in straight type from
1/4” thru 2” and 90° type from 3/8” thru 1-1/4”.
Standard Materials
• Aluminum connectors
— Straight body: aluminum
— 90° body: cast aluminum
— Cap: copperfree (4/10 of 1% or less) aluminum
— Sealing grommet: neoprene
— Washer: steel or Teon*
— Wire mesh strain relief: stainless steel
— Cap on wire mesh: copperfree (4/10 of 1% or less)
aluminum
• Steel connectors
— Straight body: machined steel
— 90° body: malleable iron
— Cap: machined steel
— Sealing grommet: neoprene
— Washer: steel or Teon *
— Wire mesh strain relief: stainless steel
— Cap on wire mesh: steel, zinc plate
Certifications and Compliances
• UL Standard: 514B
• UL Listed: E14817
• CSA Standard: C22.2 No. 18.3
• CSA Certied: 065178
Related Products
• Locknuts are available, refer to Commercial Fittings
Options
• PVC coating available on select connectors. Add sufx -PVC to
catalog number.
Suitable for use in:
Class I, Division 2
Class II, Division 1 and 2
Class III
NEMA 3R
Fittings
Fittings: CaBle and Cord Fittings
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© September 2010
98
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors