Cut Sheet
Table Of Contents
- Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
- Straight Liquidtight Strain Relief Cord and Cable Connectors
- 90° Liquidtight Strain Relief Cord and Cable Connectors
- Replacement Glands for Aluminum and Steel CG and CG90 Connectors
- Wire Mesh Strain Relief for Aluminum Cord Connectors
- Wire Mesh Strain Relief for Steel Cord Connectors
Suitable for use in:
Class I, Division 2
Class II, Division 1 and 2
Class III
NEMA 3R Not to be used with stainless steel and nickle
plated aluminum CG connectors
Replacement Glands for Aluminum and Steel CG and CG90 Connectors
Catalog Number
For Use With
Straight Connectors
For Use With
90º Connectors
Cable Range
(Inches)
Wt. Lbs./Kgs.
Per 100
For Connectors with 3/8 Inch Hubs
CGG-221 CG-1238 CG90-1238 0.125—0.187 2.50/1.13
CGG-222 CG-1838 CG90-1838 0.187—0.312 1.90/0.86
CGG-223 CG-3138 CG90-3138 0.312—0.437 1.30/0.59
For Connectors with 1/2 Inch Hubs
CGG-221 CG-1250 — 0.125—0.187 2.50/1.13
CGG-271 — CG90-1250 0.125—0.250 1.90/0.86
CGG-222 CG-1850 — 0.187—0.312 1.90/0.86
CGG-272 — CG90-2550 0.250—0.375 1.30/0.59
CGG-223 CG-3150 — 0.312—0.437 1.30/0.59
CGG-273 CG-3750 CG90-3750 0.375—0.500 1.90/0.86
CGG-274 CG-5050 CG90-5050 0.500—0.625 1.30/0.59
CGG-275 CG-6250 CG90-6250 0.625—0.750 1.00/0.45
For Connectors with 3/4 Inch Hubs
CGG-271 CG-1275 — 0.125—0.250 1.90/0.86
CGG-272 CG-2575 — 0.250—0.375 1.30/0.59
CGG-325 — CG90-2575 0.250—0.375 1.30/0.59
CGG-273 CG-3775 — 0.375—0.500 1.90/0.86
CGG-321 — CG90-3775 0.375—0.500 1.90/0.86
CGG-274 CG-5075 — 0.500—0.625 1.30/0.59
CGG-322 — CG90-5075 0.500—0.625 1.30/0.59
CGG-323 CG-6275 CG90-6275 0.625—0.750 1.00/0.45
CGG-324 CG-7575 CG90-7575 0.750—0.875 1.00/0.45
For Connectors with 1 Inch Hubs
CGG-321 CG-37100 — 0.375—0.500 1.90/0.86
CGG-322 CG-50100 — 0.500—0.625 1.30/0.59
CGG-323 CG-62100 — 0.625—0.750 1.00/0.45
CGG-374 — CG90-62100 0.625—0.750 1.00/0.45
CGG-371 CG-75100 CG90-75100 0.750—0.875 2.90/1.32
CGG-372 CG-87100 CG90-87100 0.875—1.000 2.50/1.13
CGG-373 CG-100100 CG90-100100 1.000—1.125 2.20/1.00
For Connectors with 1-1/4 Inch Hubs
CGG-371 CG-75125 — 0.750—0.875 2.90/1.32
CGG-425 — CG90-75125 0.750—0.875 2.90/1.32
CGG-372 CG-87125 — 0.875—1.000 2.50/1.13
CGG-426 — CG90-87125 0.875—1.000 2.50/1.13
CGG-421 CG-100125 CG90-100125 1.000—1.125 2.20/1.00
CGG-422 CG-112125 CG90-112125 1.125—1.250 1.90/0.86
CGG-423 CG-125125 CG90-125125 1.250—1.375 1.60/0.73
CGG-424 CG-137125 CG90-137125 1.375—1.500 1.30/0.59
For Steel Backed Neoprene Sealing Gaskets and Steel Gasketed Sealing Locknuts, see Commercial Fittings.
Fittings
Fittings: CaBle and Cord Fittings
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© September 2010
101