Cut Sheet

Table Of Contents

Rigid Metal Conduit, IMC or EMT Pipe Hangers

Applications

• Unique design accommodates more sizes of conduit with fewer

clamps for lower inventories.

• Suitable for Rigid, IMC and EMT.

• Suitable for conduit runs on vertical and horizontal beams.

Material/Finish

• Malleable iron/zinc plated

Catalog

Number

Trade

Size

(Inches)

Dimensions in Inches/Millimeters Weight

Lbs./Kgs.

Per 100ABCD

Type AJ — For Single Line Conduit

AJ-50-75 1/2-3/4 1.75/44.5 1.31/33.3 1.53/38.9 2.44/62.0 56.30/25.54

AJ-100 1 2.06/52.3 1.41/35.8 1.81/46.0 2.75/69.9 62.50/28.35

AJ-125-150 1-1/4—1-1/2 2.69/68.3 2.06/52.3 2.63/66.8 3.69/93.7 115.60/52.44

AJ-200 2 3.31/84.1 2.31/58.7 3.13/79.5 4.31/109.5 137.50/62.37

Illustrated Features

Single line of conduit running parallel to beam using “CH” hanger.

Doubles lines of conduit running perpendicular to beam using “CHD” hanger.

Commercial Products

COMMERCIAL PRODUCTS: RIGID, IMC AND EMT CLAMPS AND HANGERS

Visit our website at www.appletonelec.com or contact us at (800) 621-1506.

1655

PAGE 1
Rigid Metal Conduit, IMC or EMT Pipe Hangers Applications • Unique design accommodates more sizes of conduit with fewer clamps for lower inventories. • Suitable for Rigid, IMC and EMT. • Suitable for conduit runs on vertical and horizontal beams. Material/Finish • Malleable iron/zinc plated Illustrated Features Single line of conduit running parallel to beam using “CH” hanger.
PAGE 2
Rigid Metal Conduit, IMC or EMT Pipe Hangers Rigid Size (Inches) EMT Size (Inches) Dimensions in Inches/Millimeters for Conduit Opening Weight Lbs./ Kgs. Per 100 CH-50S 1/2 — 3/4 1/2 — 3/4 —1 0.66/16.8 77.00/34.93 CH-125S 1 1-1/4 — 1-1/2 0.66/16.8 95.00/43.10 CH-50D 1/2 — 3/4 1/2 — 3/4—1 0.66/16.8 80.00/36.29 CH-125D 1 1-1/4 —1-1/2 0.66/16.8 107.00/48.53 CHL-50 1/2 — 3/4 1/2 — 3/4—1 — 12.00/5.44 CHL-125 1 1-1/4 — 1-1/2 — 30.00/13.61 CHL-50D 1/2 — 3/4 1/2 — 3/4—1 — 16.