Cut Sheet

ManualsBrandsAppleton ManualsExplosion-ProofAPP CDJR 32W PLT CF 3/4

Code•Master

™

PLT Factory Sealed Luminaires

Explosionproof, Dust-Ignitionproof

Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.

Applications

• For use in hazardous locations such as plants where plastics,

paints, thinners and petrochemicals are manufactured, and in

other areas where ignitable vapors, dust, moisture and corrosive

elements may be present.

• For use in areas where an instant-on white light is desired.

• Suitable for use in wet locations.

• Standard xtures designed for 26 W, 32 W, 42 W, 52 W (two 26

W), 64 W (two 32 W), and 84 W (two 42 W) PLT lamps.

• Cold weather starting to a minimum temperature of -18 °C

(0 °F) for the Code•Master Jr. PLT and -30 °C (-22 °F) for the

Code•Master 2 PLT.

Features

• Fixtures operate safely in high ambient temperatures.

• Arrangement of heat-producing components results in efcient

heat dissipation for cooler xture operation.

• Patented “wireless” design. Threading of xture unit onto

mounting hood makes electrical connection. The only

wiring required is attaching two wires to connection block

in mounting hood.

• Connection block is easily wired: (a) loosen two screws; (b)

make wire connections; and (c) reposition connection block.

• Safe, easy servicing without disconnecting any wiring.

“Wireless” xture unit threads off mounting hood for convenient

servicing or for immediate replacement with a “stand-by” unit.

• Acme double-lead threads speed installation and xture removal

from mounting hood – only half as many turns are required

as for single-lead threads. The threads do not stick, or gall,

eliminating problems often encountered with single-lead threads

during xture unit removal.

• All threaded joints are ame-tight.

• Factory sealed. External seals not required for Groups C and D.

• Fixtures for use in Group B locations are furnished complete

with UL required sealing tting for Code•Master Jr. PLT only.

• Heat- and impact-resistant globes have smooth

dust-resistant exterior.

• Superior corrosion resistance, with epoxy powder coat nish.

• Fluorescent light source reduces energy cost.

• Strategic location of lamp socket, in combination with interior

prism design of the glass globe, provides optimum light

distribution and control.

• Choice of mountings – pendant, ceiling, bracket and stanchion.

• Optional guards protect globes from damage. Secured to xture

with three stainless steel screws.

• Fiberglass reinforced polyester reectors, in standard dome

or 30° angle styles, are ideal in installations where luminaire is

subject to exceptionally severe corrosive atmospheres. The

high bay aluminum reector is intended for installations where

mounting height work planes range from 6 to 9 m (20 to 30 ft).

• Fluorescent lamp life of 10,000 hours reduces relamping cost

compared to incandescent, and provides superior T numbers.

Standard Materials

• Ballast bodies and guards: copperfree (4/10 of 1% max.)

aluminum

• Pendant mounting hoods: diecast copperfree (4/10 of 1% max.)

aluminum

• Ceiling, bracket and stanchion mounting hoods: sand cast

copperfree (4/10 of 1% max.) aluminum

• Reectors: berglass reinforced polyester (white) or aluminum

Standard Finishes

• Ballast bodies, guards and mounting hoods: epoxy powder

coat nish, electrostatically applied for complete, uniform

corrosion protection

NEC/CEC Certifications and Compliances

• UL Standard: UL 1598, UL 844

• UL Listed: E10444

• CSA Standard: C22.2 No. 250, C22.2 No. 137

• CSA Certied: 025428

26-42W

Code•Master Jr. PLT

52-84W

Code•Master 2 PLT

Illustrated Features

Collector Ring

and Pin

Mounting Hood

Connection Block

Double Lead

Acme Threads

As Fixture unit is threaded into mounting

hood an automatic electrical connection is made.

 Fixtures are for use with Group B atmospheres only when used with Group B mounting hoods. For 26 W,32 W, and 42 W fixtures only.

NEC:

Class I, Division 1 and 2, Groups B, C, D

Class II, Division 1 and 2, Groups E, F, G

Class III

NEMA 4X

Suitable for use in wet locations

CEC:

Class I, Division 1 and 2, Groups B, C, D

Class II, Division 1 and 2, Groups E, F, G

Class III

CSA 4X

FLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF

Visit our website at www.emerson.com or contact us at (800) 621-1506.

496

Summary of content (13 pages)

PAGE 1
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.
PAGE 2
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit. NEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III NEMA 4X Suitable for use in wet locations CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III CSA 4X Catalog Numbering Guide CJ F Series: CJ - Code•Master Jr.
PAGE 3
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.
PAGE 4
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.
PAGE 5
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.
PAGE 6
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.
PAGE 7
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.
PAGE 8
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 26 W, 32 W, 42 W, 52 W, 64 W, 84 W Compact Fluorescent. For use with Threaded Metal Conduit.
PAGE 9
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof * Photometric data is based on a fixture with a 32 W compact fluorescent PL-T lamp (2,400 lumens). For candlepower values of fixtures with 26 W PL-T lamps (1,800 lumens), multiply by 0.75. For candlepower values of fixtures with a 42 W PL-T Lamp (3,200 lumens), multiply by 1.34.
PAGE 10
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof * Photometric data is based on a fixture with a 32 W compact fluorescent PL-T lamp (2,400 lumens). For candlepower values of fixtures with 26 W PL-T lamps (1,800 lumens), multiply by 0.75. For candlepower values of fixtures with a 42 W PL-T Lamp (3,200 lumens), multiply by 1.34. ** Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each).
PAGE 11
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof ** Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T lamps. (3,200 lumens each) multiply by 1.34.
PAGE 12
Code•Master™ PLT Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof ** Photometric data is based on a fixture with two 32 W Compact Fluorescent PL-T lamps (2,400 lumens each). For candlepower values of fixtures with two 26 W PL-T lamps (1,800 lumens each), multiply by 0.75. For Candlepower values of fixtures with two 42 W PL-T Lamps. (3,200 lumens each) multiply by 1.34.
PAGE 13
ELS Series Emergency Lighting System Explosionproof, Dust-Ignitionproof Remote and direct mounted fixtures for hazardous location applications NEC: Class I, Division 1 and 2, Groups B , C, D Class II, Division 1 and 2, Groups E, F, G Class III Applications • ELS Series features an emergency lighting power unit that is designed to provide safe operation in the presence of hazardous gases, vapors or dusts, defined by the National Electrical Code as Class I, Groups C and D, and Class II, Groups E, F and G.