Cut Sheet
Catalog
Number
Trade
Size
(Inches)
Dimensions in Inches/Millimeters
Weight
Lbs./Kgs.
Per 100AB C
Hole
Diameter
Combination Clamp and Clamp Backs — Steel/Zinc Electroplate
CL-50CB 1/2 — — — — 5.00/2.27
—
CL-75CB 3/4 — — — — 5.00/2.27
CL-100CB 1 — — — — 6.00/2.72
One-Hole Clamps — Steel/Zinc Electroplate
CL-25 1/4 0.63/16.0 0.47/11.9 0.59/15.0 0.25/6.3 1.70/0.77
CL-38 3/8 0.81/20.6 0.63/16.0 0.69/17.5 0.28/7.1 2.60/1.18
CL-50 1/2 1.00/25.4 0.75/19.1 0.94/23.9 0.28/7.1 5.00/2.27
CL-75 3/4 1.16/29.5 0.75/19.1 1.13/28.7 0.28/7.1 5.90/2.68
CL-100 1 1.34/34.0 0.88/22.4 1.44/36.6 0.34/8.6 12.20/5.53
CL-125 1-1/4 1.69/42.9 1.00/25.4 1.78/45.2 0.41/10.4 19.00/8.62
CL-150 1-1/2 1.94/49.3 1.13/28.7 2.00/50.8 0.41/10.4 25.00/11.34
CL-200 2 2.34/59.4 1.19/30.2 2.53/64.3 0.47/11.9 38.00/17.24
CL-250 2-1/2 2.81/71.4 1.25/31.8 3.03/77.0 0.56/14.2 76.00/34.47
CL-300 3 3.31/84.1 1.25/31.8 3.66/93.0 0.56/14.2 93.00/42.18
CL-350 3-1/2 3.44/87.4 1.50/38.1 4.16/105.7 0.69/17.5 123.00/55.79
CL-400 4 3.78/96.0 1.50/38.1 4.66/118.4 0.69/17.5 140.00/63.50
Clamp Backs — Steel — Can be used with EMT
CLB-50 1/2 2.06/52.3 0.88/22.4 0.25/6.4 — 5.00/2.27
A
CLB-75 3/4 2.50/63.5 1.00/25.4 0.25/6.4 — 7.00/3.18
CLB-100 1 2.69/68.3 1.13/28.7 0.25/6.4 — 8.60/3.90
Beam Clamps, Straps, Clamps and Clamp Backs for Rigid Metal Conduit or IMC
Commercial Products
COMMERCIAL PRODUCTS: RIGID, IMC AND EMT CLAMPS AND HANGERS
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© September 2010
1653