Cut Sheet

Effective September, 2005
Copyright 2005
800-621-1506
www.appletonelec.com
PAGE 3
I-3
I
Unions, Sealing Fittings, Flexible Couplings,
Elbows, Drain/Breather, Close-Up Plugs:
Explosionproof
UNILETS
®
for Use with Threaded Metal Conduit
Features: All Fittings
•
Explosionproof, dust-ignitionproof.
•
Smooth, rounded integral bushing in
each hub protects conductor insulation.
•
Accurately tapped, tapered threads for
tight, rigid joints and ground continuity.
Features: Non-Expansion Unions
❶ Concentric ring interlocked design of
1/2”, 3/4” and 1” sizes makes possible
smaller diameter, allowing use in tight
-
er spaces. 1-1/4” and larger UNY sizes
have removable male nipple.
•
Choice of malleable iron or alumi-
num
.
Features: Expansion Unions
❷ One-piece design eliminates need
for disassembly during installation.
•
Telescoping cylinder within cylinder
design permits expansion or contraction.
•
Standard or long types available.
•
Small external diameters—excellent
in restricted areas in wiring of pumps,
motors, and other equipment.
•
Internal phosphor bronze “bonding
jumper” ring assures positive ground
between telescoping cylinders.
Features: Sealing Fittings
❸ Raintight construction.
•
Removable nipple in male sealing
fitting may be used interchangeably in
top or bottom hub.
•
EYS—for sealing vertical conduit.
Large opening for damming and filling.
•
Expanded Fill EYSEF/EYDEF— allow
up to 40% conduit fill in compliance
with the National Electrical Code.
•
EYSF/EYSM—for sealing vertical con-
duit. Large opening for damming and fill
-
ing.
•
ESUF/ESUM for sealing vertical
or horizontal conduit. Pouring spout
rotates
90° Removable cover provides
full access
for damming 2-1/2” thru 4”
sizes have threaded cover openings
for damming.
•
EYF/EYM—close radius type for seal-
ing vertical or horizontal conduit runs
.
•
EYDM Drain Sealing Fittings—close
radius type for sealing vertical conduit
runs. Access cover has drain valve for
automatic draining of water accumula
-
tion above the seal.
•
Kwiko
®
A sealing cement is a specially
formulated water soluble powder. Mixed
to the proper proportions, it is poured in
sealing fittings and hardens to contain
and restrict the passage of gases and
explosions in classified areas
.
•
Fiber Filler-makes dams around
and between all conductors to prevent
sealing compound from leaking while
being poured in its liquid state.
Features: Sealing Hubs
❹ UL Listed for use in hazardous
locations when Kwiko
®
A Sealing
Compound or Crouse-Hinds Chico
®
A
Sealing Compound are used to make
the seal.
Features: Flexible Couplings
❺ Heavy duty design resists mechani-
cal abuse. Watertight.
•
Electrical conductivity equal to rigid
conduit on a similar length basis—no
bonding jumper required.
•
Interior insulating liner protects con-
ductors from abrasion under vibrating
conditions.
•
EXGJH—both end fittings are female,
each furnished with a removable male
nipple.
•
EXLK—female end fitting with union at
one end and a female end fitting with a
removable male nipple at the other end.
Standard Materials
•
UNY and UNF (Non-Expansion) Unions,
1/2” thru 1”: steel or aluminum. 1-1/4”
thru 6”: malleable iron or aluminum.
•
UNY and UNF Expansion Unions: steel.
•
UNL Unions: malleable iron and steel.
•
EYSF/EYSM, EYF/EYM and EYDM Seals:
malleable iron or Almag 35 aluminum.
•
EYS, EYSEF/EYDEF, and ESUF/ESUM:
malleable iron.
•
EYD and EYS Seals: Grayloy
®
-iron.
•
EXGJH and EXLK Couplings, 1/2”
thru 2”: outer bronze braid, inner brass
core with insulating liner; 2-1/2” thru
4”: outer stainless steel braid, inner
stainless steel core with insulating
liner. End Fittings:
1/2” thru 2”—brass;
2-1/2” thru 4”—stainless steel.
•
PLG Close-Up Plugs: malleable iron,
steel, or aluminum.
•
BR Reducers: malleable iron or aluminum.
•
EL and UNA Elbows: malleable or cast
iron.
•
ECDB Combination Drain/Breather:
stainless steel.
Standard Finishes
•
Unions—UNY,UNF and UNL (Non-Ex-
pansion) and UNY and UNF (Expansion)
of malleable iron have triplecoat—(1)
zinc electroplate, (2) dichromate, and (3)
epoxy powder coat, of steel have zinc
electroplate, of aluminum 1/2” thru 2” have
natural finish and 2-1/2” thru 4” have epoxy
powder coat.
•
Sealing Fittings— EYSF/EYSM, ESUF/
ESUM, EYF/EYM,EYDM and EYD/EYS
of malleable iron and Grayloy
®
-iron have
triple-coat—(1) zinc electroplate, (2)
dichromate, and (3) epoxy powder coat, of
Almag 35 aluminum have epoxy powder
coat.
•
Sealing Hubs—ES of malleable iron
have a triple-coat—(1) zinc electroplate,
(2) dichromate, and (3) epoxy powder
coat.
•
Flexible Couplings—EXGJH and EXLK
natural finish.
•
Close-up Plugs—PLG of malleable iron
have a triple-coat—(1) zinc electroplate,
(2) dichromate, and (3) epoxy powder
coat; steel have zinc electroplate; alumi
-
num have natural finish.
•
Bell Reducers—BR of malleable iron
have a triple-coat—(1) zinc electroplate,
(2) dichromate, and (3) epoxy powder
coat; aluminum have natural finish.
•
Elbows —EL are malleable iron and
have zinc electroplate; UNA are mal
-
leable iron and have a triple-coat—(1)
zinc electroplate, (2) dichromate, and
(3) epoxy powder coat.
•
Combination Drain/Breathers —ECDB
are passivated stainless steel and have
a natural finish.
Options
•
For ES Sealing Hubs, add suffix BLSG
for sealing gaskets and locknuts (pro
-
vide a water and oil-tight connection).
Compliances
•
UL Standard 886
•
Appleton malleable iron products
conform to ASTM A47-77, Grade
32510. which has the following proper
-
ties: tensile strength, 50,000 psi; yield,
32,000 psi; and elongation, 10%.
•
A pple ton alu m inu m pro d uct s
are produced from a high strength
copper-free (4/10 or 1% max.) alloy.
•
Class I, Div. 1 & 2 and Class II, Div.
1 & 2, if installed as follows: Unions,
Elbows, Plugs, Flex. Couplings
—
NEC
501-4 (a)(b); Seals—NEC 501-5
(a)(b)(c) (d)(e) and NEC 502-5; Drains—
NEC 501-5(f).