Cut Sheet

Controls
Controls: Hazardous loCation Control stations and switCHes
Visit our website at www.appletonelec.com or contact us at [phone].
© October 2012
270
Contender
®
Series Covers
For Contender
®
Bodies Only
Covers
‡
Only — for use on standard Contender bodies
Supplied with 4 stainless steel captive bolts *
Description Catalog Number
Push Button and Pilot Light Covers — 3/4” Tapped Openings
Oneopening:onepushbuttonoronepilotlight EDSK-1J
Twoopenings:twopushbuttons,twopilotlights,oroneofeach EDSK-2J
EDSK-1J EDSK-2J
Threeopenings:threedevice,threepushbuttonsorthreepilotlights,or
combinationofpushbutton(s)andpilotlight(s)
EDSKL-3PB *
EDSKL-3PB
Push Button or Selector Switch Cover — 1/2” Tapped Openings
Twoopenings:selectorswitchortwopushbuttons(sidebyside) EDSK-2SP
Push Button, Pilot Light or Selector Switch Covers — 3/4” top and 1/2” Bottom Tapped
Openings
Onetopandtwobottomopenings:onepilotlight,
twopushbuttons(sidebyside);onepilotlight,oneselectorswitch.
EDSK-1JSS
Blank EDSK-B
EDSK-1JSS EDSK-B
Nameplate Mounting Bracket
Mount bracket between cover screws and cover. Do not mount bracket between ground joint flame path between
cover and backbox.
Bracketwithblanksilver/blacknameplate NPBRKT-CONT
Toorderbracketwithcontrolstation,addsuffix–NPBRKTtoendofcatalognumber.
Toorderengravednameplates,adddesiredmarkingsaftercatalognumber.Maximumof2lineswith
12characters(includingspaces)perline.
* Catalog number EDSKL-3PB supplied with 8 stainless steel non-captive bolts.
◊ Must be used with Contender Series backboxes.
‡ For Aluminum Cover only, add suffix - A.