Cut Sheet

Effective September, 2005
Copyright 2005
PAGE 16
800-621-1506
www.appletonelec.com
M- 16
M
EFD/EFDB Push Buttons:
Accessories and Parts
Class I, Div. 1 and 2
Groups B*,C,D
Class II, Div. 1 and 2
Groups E,F,G
Class III
For use with
Maintained
For use with
Momentary
Description Catalog Number
Push Button, Factory Sealed - Momentar y Contact
10 Amp 600V A.C. Heavy Duty 1/2” thread size. Furnished with 1/2” to 3/4” enlarger,
Weather Boot, Guard, Start, Stop and Blank Nameplates.
Universal SPBB-U1-Q
Push Button, Factory Sealed - Maintained Conta ct
10 Amp 600V A.C. Heavy Duty 1/2” thread size. Furnished with 1/2” to 3/4” enlarger,
Guard not furnished.
Universal SMPB-U1-Q
Rectangular Button with Weather Boot
Furnished with Start, Stop and Blank Nameplates. NBN-WB
Nameplates for Rectangular Push Buttons
Blank SNP-B-Q Off SNP-OFF-Q
Forward SNP-FWD-Q On SNP-ON-Q
Jog SNP-JOG-Q Reverse SNP-REV-Q
Run SNP-RUN-Q Open SNP-OPEN-Q
Stop SNP-SP-Q Close SNP-CLOSE-Q
Start SNP-ST-Q Up SNP-UP-Q
Down SNP-DOWN-Q Te s t SNP-TEST-Q
Fast SNP-FAST-Q Low SNP-LOW-Q
Slow SNP-SLOW-Q High SNP-HIGH-Q
Raise SNP-RAISE-Q
Lower SNP-LOWER-Q
Reset SNP-RESET-Q
Push Button Replacement Locking Guards-
Glass Reinforced Polypropylene (Gasketed)
Has hole for 1/4” hasp.
Single Guard (Maintained Switch) SMPB-LG
Single Guard NPB-LG1
Double Guard NPB-LG2
Single Guard (No Lockout Holes) NPB-LG1-LL
Double Guard (No Lockout Holes) NPB-LG2-LL
Push Button Securing Rod with Chain-
Stainless Steel (For use with Single Guard Only) NBL-SR
Mushroom Button with Weather Boot (Gasketed)
For use with Momentary Contact
Black NMRB-BL
Green NMRB-GR
Red NMRB-RE
Mushroom Button (For use with Maintained Contact)
Solid-colored non-metallic button.
Red
NMRBM-RE
Nameplates For Mushroom Head Push Button (Momentary & Maintained)
Start MNPSTQ
Stop MNPSPQ
Emergency Stop MNPESTPQ
Blank MNPBQ
Maintained
Contact
Momentary
Contact
Maintained
Switch Guard
Single
Guard
Double
Guard
*Suitable for Class I, Group B when installed in an enclosure rated for Class I, Group B.