Cut Sheet

Class I, Division 1 and 2 Groups A, B, C, D

Class II, Division 1 and 2 Groups E, F, G

Class III

Applications

• Used to seal vertical conduit risers at switch gear and motor

control centers, sheet metal structures, or cast boxes and

enclosures.

• Can be used as a male thread enlarger or conduit hub in an

ordinary location.

Features

• Explosionproof, dust-ignitionproof.

• Smooth, rounded integral bushing in each hub protects

conductor insulation.

• Accurately tapped, tapered threads for tight, rigid joints and

ground continuity.

• Allows up to 25% conduit ﬁ ll in compliance with the National

Electrical Code.

• UL Listed for use with Kwiko

A Sealing Compound. Also listed

with certain competitors sealing cement, contact factory for

details.

Standard Materials

• Malleable iron

Standard Finishes

• Triple-coat — (1) zinc electroplate, (2) chromate, and (3) epoxy

powder coat

Options

• Sealing gaskets and locknuts (to provide a water and oil-tight

connection), add sufﬁ x -BLSG to catalog number

Certifications and Compliances

• UL Standard: 886 (1203)

• UL Listed: E10444

• CSA Standard: C22.2 No. 30

• CSA Certiﬁ ed: 065181

PAGE 1
ES 25% Sealing Hubs Explosionproof, Dust-Ignitionproof UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Class I, Division 1 and 2 Groups A, B, C, D Class II, Division 1 and 2 Groups E, F, G Class III Applications • Used to seal vertical conduit risers at switch gear and motor control centers, sheet metal structures, or cast boxes and enclosures. • Can be used as a male thread enlarger or conduit hub in an ordinary location. Fittings Features • Explosionproof, dust-ignitionproof.