Cut Sheet
Class I, Division 1 and 2 Groups A, B, C, D
Class II, Division 1 and 2 Groups E, F, G
Class III
Trade
Size
(Inches)
Inches/Millimeters
Kwiko
®
A Cement
Required
Ounces/Grams
Catalog Number
A (Length) B (Width)
Turning Radius ➋ Malleable Iron Almag 35 Aluminum
Female
1/2 3.50/88.9 1.19/30.2 1.06/26.9 1.00/28.4
EYF-50
➌ EYF-50AL
➌
3/4 3.50/88.9 1.38/35.0 1.19/30.2 2.00/56.7
EYF-75
➌ EYF-75AL
➌
1 4.25/107.9 1.75/44.4 1.38/35.0 4.00/113.4
EYF-100
➌ EYF-100AL
➌
1-1/4 4.94/125.4 2.00/50.8 1.75/44.4 7.00/198.4
EYF-125
➌ EYF-125AL ➌
1/2"— 1"
1-1/2 5.50/139.7 2.38/60.4 2.06/52.3 13.00/368.5
EYF-150
➌ EYF-150AL ➌
2 6.13/155.7 2.88/73.1 2.31/58.6 22.00/623.7
EYF-200
➌ EYF-200AL ➌
2-1/2 7.50/190.5 3.38/85.8 2.69/68.3 36.00/1020.6
EYF-250
➌ EYF-250AL ➌
1-1/4" — 3"
3 8.13/206.5 4.13/104.9 3.13/79.5 61.00/1729.3
EYF-300
➌ EYF-300AL ➌
3-1/2 8.94/227.0 4.75/120.6 3.44/87.3 89.00/2523.1
EYF-350
EYF-350AL
4 9.38/238.2 5.13/130.3 3.69/93.7 114.00/3231.8
EYF-400
➌ EYF-400AL ➌
5 10.81/274.5 6.25/158.7 4.69/119.1 202.00/5726.6
EYF-500 ➍
—
3-1/2" — 6"
6 11.81/299.9 7.31/185.6 5.38/136.6 230.00/6520.4
EYF-600 ➍
—
Male/Female (Removable Male Nipple)
1/2 3.50/88.9 1.19/30.2 1.06/26.9 1.00/28.4
EYM-50
➌ EYM-50AL
➌
3/4 3.50/88.9 1.38/35.0 1.19/30.2 2.00/56.7
EYM-75
➌ EYM-75AL
➌
1 4.25/107.9 1.75/44.4 1.38/35.0 4.00/113.4
EYM-100
➌ EYM-100AL
➌
1-1/4 4.94/125.4 2.00/50.8 1.75/44.4 7.00/198.4
EYM-125
➌ EYM-125AL ➌
1/2"— 1"
1-1/2 5.50/139.7 2.38/60.4 2.06/52.3 13.00/368.5
EYM-150
➌ EYM-150AL ➌
2 6.13/155.7 2.88/73.1 2.31/58.6 22.00/623.7
EYM-200
➌ EYM-200AL ➌
2-1/2 7.50/190.5 3.38/85.8 2.69/68.3 36.00/1020.6
EYM-250
➌ EYM-250AL ➌
1-1/4" — 3"
3 8.13/206.5 4.13/104.9 3.13/79.5 61.00/1729.3
EYM-300
➌ EYM-300AL ➌
3-1/2 8.94/227.0 4.75/120.6 3.44/87.3 89.00/2523.1
EYM-350
EYM-350AL
4 9.38/238.2 5.13/130.3 3.69/93.7 114.00/3231.8
EYM-400
➌ EYM-400AL ➌
5 10.81/274.5 6.25/158.7 4.69/119.1 202.00/5726.6
EYM-500 ➍
—
3-1/2" — 6"
6 11.81/299.9 7.31/185.6 5.38/136.6 230.00/6520.4
EYM-600 ➍
—
➊ Per NEC 501.15(C)(6), seals in Class I, Division 1 and 2 must be limited to conductor fill of 25% of cross sectional area of a rigid metal conduit of the same trade
size unless approved for higher percentage fill. See 40% fill sealing fittings.
➋ Turning radius with cover or plug removed.
➌ PVC coating available on select sealing fittings. Add suffix -PVC to catalog number.
➍ Not UL Listed. CSA Certified only.
Indicates items in the shaded area which are UL Listed for Class I, Groups A, B, C, D; Class II, Groups E, F, G; and Class III.
Indicated items in the shaded area which are UL Listed for Class I, Groups B, C, D; Class II, Groups E, F, G; and Class III.
Fittings
Fittings: Hazardous sealing Fittings
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© September 2010
180
EY 25%
➊
Fill Vertical and Horizontal Conduit Sealing Fittings for Close Turning Radius
Explosionproof, Dust-Ignitionproof, Raintight
UNILETS
®
for Use with Threaded Rigid Metal Conduit and IMC.