Cut Sheet
Class I, Division 1 and 2 Groups A, B, C, D
Class II, Division 1 and 2 Groups E, F, G
Class III
Trade
Size
(Inches)
Inches/Millimeters
Kwiko
®
A Cement
Required
Ounces/Grams
Catalog Number
Grayloy™-Iron
A (Length) B (Width)
Turning Radius
†
EYS Vertical and Horizontal Conduit Seals for Close Turning Radius (25% fill)
1/2" — 1"
Female
1/2
3.69/93.7 1.25/31.7
1.16/29.4 1.00/28.0 EYS-11
3/4
3.69/93.7 1.50/38.1
1.25/31.7 2.00/57.0 EYS-21
1
4.31/109.4 1.75/44.4
1.38/35.5 4.00/113.0 EYS-31
1-1/4
5.06/128.5 2.19/55.6
1.75/44.4 9.00/255.0 EYS-4
1-1/2
5.50/139.7 2.44/61.9
2.06/52.3 12.00/340.0 EYS-5
2
6.25/158.7 3.00/76.2
2.31/58.6 21.00/595.0 EYS-6
2-1/2
7.50/190.5 3.50/88.9
2.69/68.3 37.00/1049.0 EYS-7
3 8.50/215.9 4.25/107.9 3.13/79.5 61.00/1729.0 EYS-8
1-1/4" — 3" 3-1/2
9.19/233.4 4.75/120.6
3.44/87.3 80.00/2268.0 EYS-9
4
9.75/247.6 5.25/133.3
3.69/93.7 112.00/3175.0 EYS-10
5
11.06/294.6 6.50/165.1
4.69/119.1 198.00/5613.0 EYS-012
3-1/2" — 6" 6
12.13/308.1 7.63/193.8
5.38/136.6 230.00/9667.0 EYS-014
1/2" — 1"
Male/Female (Removable Male Nipple)
1/2
3.69/93.7 1.25/31.7
1.16/29.4 1.00/28.0 EYS-116
3/4
3.69/93.7 1.50/38.1
1.25/31.7 2.00/57.0 EYS-216
1
4.31/109.4 1.75/44.4
1.38/35.5 4.00/113.0 EYS-316
1-1/4
5.06/128.5 2.19/55.6
1.75/44.4 9.00/255.0 EYS-46
1-1/2
5.50/139.7 2.44/61.9
2.06/52.3 12.00/340.0 EYS-56
2
6.25/158.7 3.00/76.2
2.31/58.6 21.00/595.0 EYS-66
2-1/2
7.50/190.5 3.50/88.9
2.69/68.3 37.00/1,049.0 EYS-76
3
8.50/215.9 4.25/107.9
3.13/79.5 61.00/1,729.0 EYS-86
1-1/4" — 3" 3-1/2
9.19/233.4 4.75/120.6
3.44/87.3 80.00/2,268.0 EYS-96
4
9.75/247.6 5.25/133.3
3.69/93.7 112.00/3,175.0 EYS-106
5
11.06/294.6 6.50/165.1
4.69/119.1 198.00/5,613.0 EYS-0126
3-1/2" — 6" 6
12.13/308.1 7.63/193.8
5.38/136.6 230.00/9,667.0 EYS-0146
EYS
1/2" — 1"
EYS
1-1/4" — 6"
* Per NEC 501.15(C)(6), seals in Class I, Division 1 and 2 must be limited to conductor fill of 25% of cross sectional area of a rigid metal conduit of the same trade
size unless approved for higher percentage fill. See 40% fill sealing fittings.
† Turning radius with cover or plug removed.
Indicates items in the shaded area which are UL Listed for Class I, Groups A, B, C, D; Class II, Groups E, F, G; and Class III.
Fittings
Fittings: Hazardous sealing Fittings
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© September 2010
182
EYS 25% * Fill Vertical and Horizontal Sealing Fittings for Close Turning Radius
Explosionproof, Dust-Ignitionproof, Raintight
UNILETS
®
for Use with Threaded Rigid Metal Conduit and IMC.