Cut Sheet

Description Box Quantity Catalog Number Description Box Quantity Catalog Number
Locknuts – Nickel Plated Brass
• Brass locknuts are recommended for use in securing brass cable glands to a gland plate or into equipment.
M16 100 16LN5 050NPT 100 050NPTLN5
M20 100 20LN5 075NPT 100 075NPTLN5
M25 100 25LN5 100NPT 50 100NPTLN5
M32 50 32LN5 125NPT 50 125NPTLN5
M40 50 40LN5 150NPT 10 150NPTLN5
M50 10 50LN5 200NPT 5 200NPTLN5
M63 5 63LN5 250NPT 5 250NPTLN5
M75 5 75LN5 300NPT 1 300NPTLN5
M90 1 90LN5 350NPT 1 350NPTLN5
M100 1 100LN5 ———
Earth Tags – Pear (Nickel Plated Brass)
• Installed between the cable gland and equipment. Provide an earth bond connection as specifi ed in BS 6121 : Part 5 : 1993.
M16 100 16ET5 050NPT 100 050NPTET5
M20 100 20ET5 075NPT 100 075NPTET5
M25 100 25ET5 100NPT 50 100NPTET5
M32 50 32ET5 125NPT 50 125NPTET5
M40 50 40ET5 150NPT 10 150NPTET5
M50 10 50ET5 200NPT 5 200NPTET5
M63 5 63ET5 250NPT 5 250NPTET5
M75 5 75ET5 300NPT 1 300NPTET5
M90 1 90ET5 350NPT 1 350NPTET5
M100 1 100ET5 ———
Entry Thread Seals – Sealing (IP) Washers
• It is essential to maintain the integrity of the degree of IP protection for which explosionproof equipment have been rated. The need for a
sealing washer will depend on the IP rating, code of protection and the type of entry holes available within that equipment (e.g. for Ex e
apparatus or terminal boxes which are permitted to have untapped through clearance holes it is necessary to fi t a sealing washer to ensure
that the minimum IP54 requirement is met). Other equipment with tapped entry holes may not require a sealing washer to maintain the
rated integrity of the instal lation.
• Entry thread sealing washers are produced in 2mm thick white nylon as standard which are recommended and meet the specifi ed
requirements of Shell’s Offshore operations.
• To verify the effectiveness of the nylon entry sealing washers, independent 3rd party tests to BS EN 60529:1992 have been conducted on
certain cable gland types at IP66, IP67 and IP68 levels of protection. Documentation of these high standard tests is available upon request.
M16 1000 16ETS2 050NPT 100 050NPTETS
M20 1000 20ETS2 075NPT 100 075NPTETS
M25 1000 25ETS2 100NPT 50 100NPTETS
M32 500 32ETS2 125NPT 50 125NPTETS
M40 200 40ETS2 150NPT 10 150NPTETS
M50 200 50ETS2 200NPT 5 200NPTETS
M63 100 63ETS2 250NPT 5 250NPTETS
M75 100 75ETS2 300NPT 1 300NPTETS
M90 10 90ETS2 350NPT 1 350NPTETS
M100 10 100ETS2 ———
Fittings
NEC/CEC CLASS/ZONE AND ATEX/IECEX/NBR IEC ZONE 1 RATED CABLE GLANDS
Visit our website at www.appletonelec.com or contact us at [phone].
© May 2014
215
Cable Gland Accessories and Tools