Installation guide

ManualsBrandsApplica ManualsCoffee MakerAM7

5544

3. Test the NEUTRAL SAFETY shutdown circuit:

IIMMPPOORRTTAANNTT!!

Make sure there is adequate clearance to the front and rear of the vehicle before

attempting this test.

a. Make sure the hood is closed and no other shutdown circuits are active.

b. Set the emergency brake.

c. Turn the ignition key to the run position but do not start the engine.

d. Put the vehicle in Drive (D).

e. Put your foot over the brake pedal but do not press down on it. Be ready to step on the brake to shut-

down the remote start system.

f. Activate the remote start system.

■ If the starter engages, immediately step on the brake to shut down the system. If it does engage,

recheck the neutral safety input connection. The vehicle may use a mechanical neutral safety switch.

(See H3/1 BLACK/WHITE neutral safety switch input in

Remote Start Harness Wire Connection Guide

section of this guide.)

■ If the starter does not engage, the test is complete.

Once the system passes the three tests, the vehicle can be re-assembled and delivered. Do not the use the remote

start system or finalize the installation if it fails any of the safety check tests.

ttrroouubblleesshhoooottiinngg

■

SShhoocckk sseennssoorr ddooeessnn''tt ttrriiggggeerr tthhee aallaarrmm::

Has the NPC system been triggered? If so, you will hear 5 chirps when disarming. To check this, turn the igni-

tion key on and off to clear the NPCs memory, and then retest the shock sensor. For a detailed description of

NPC, see

Nuisance Prevention® Circuitry

section of this guide.

■

DDoooorr iinnppuutt ddooeess nnoott iimmmmeeddiiaatteellyy ttrriiggggeerr ffuullll aallaarrmm.. IInnsstteeaadd,, cchhiirrppss aarree hheeaarrdd ffoorr tthhee ffiirrsstt 33 sseecco

onnddss::

That's how the progressive two-stage door input works! This is a feature of this system. This is an instant trigger,

remember, since even if the door is instantly closed again, the progression from chirps to constant siren will continue.

■

CClloossiinngg tthhee ddoooorr ttrriiggggeerrss tthhee ssyysstteemm,, bbuutt ooppeenniinngg tthhee ddoooorr ddooeess nnoott::

Have you correctly identified the type of door switch system? This happens often when the wrong door input has

been used. (See

Door Lock Harness Wire Connection Guide

section of this guide.)

aallaarrmm ttrroouubblleesshhoooottiinngg