User's Manual

58 The Editor View
Figure 33: Phaser algorithm.
Figure 34: Frequency response of a Phaser module. Effect of the mix between wet and dry signal
on the frequency response.
Tuning
The location of the first notch in the frequency response of the module is adjusted with the Fre-
quency knob This frequency can be modulated by an amount controlled with the Depth knob. In its
leftmost position, the location of the first notch is fixed but it starts to oscillate by an amount which
increases as the Depth knob is turned clockwise. The frequency of the modulation is controlled
using the the Rate knob. The feedback knob is used to fix the amount of wet signal re-injected into
the delay. Finally, the Mix knob determines the amount of dry and wet signal sent to the output.
When this knob is adjusted in the left position, only dry signal is sent to the output, in its center
position, there is an equal amount of dry and wet signal in the output and in the right position, only