User's Manual

74 Audio and MIDI Settings
Pitch bend can quickly be disabled or enabled for each layer from the Layer Settings window
which is opened by clicking on the ellipsis icon next to a layer label and choosing the Layer Settings
command.
8.2.7 Modulation Wheel
Chromaphone 3 responds to the signal from the modulation wheel of MIDI keyboards (continuous
controller number 1). The first macro module is usually mapped to this controller. For more
information on the Macros modules, please refer to section 5.2.4.
8.2.8 Sustain Pedal
By default, Chromaphone 3 responds to MIDI sustain pedal messages (MIDI cc number 64). The
sustain pedal can however be turned on or off independently for each layer from the Layer Settings
window which is opened by clicking on the ellipsis icon next to a layer label and choosing the
Layer Settings command.