User's Manual

Page 13

14. Repeat the process above for all other patches to ensure that your patches are set

up correctly.

NOTE: It is not necessary to turn the Remote Unit off during programming and

editing unless changes are made to the mode select switches.

15. Verify that all patches that have been programmed are working correctly on each

remote. It is a good idea to write down your patches so that they can be easily

recalled and updated. Use the tables in the back of this manual to record your

settings for reference.

Note: When Editing a Body Pack Patch there are LED’s visible on the front panel of

the body pack’s enclosure to assist you with patch and channel selection. These are

not labeled, but are arranged as shown in the picture below. 1 is at the top and AB is

at the bottom. The LED’s are also color coded to help tell them apart.

1-RED, 2-AMBER, 3-GREEN, 4-RED, M-AMBER, AB-GREEN.

All of the functions on the body pack work exactly the same as the floor unit. The

only difference is that the TS1 and TS2 are only available on the Floor Unit.

Contact Info

Find us on the World Wide Web at www.FXConnectX.com

Any questions, comments, or suggestions? Just give us a call or send us an email! We want to

hear from you! 1-888-FXC-3776

Thank You for purchasing our American-Made product!

Sincerely, The FXConnectX crew