Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Page - 52 Revision 1.0
6.4.5.2. Fault Hold Duration
The Fault Hold Duration slider sets the number of frames that the error condition is held once a fault is
generated.
6.4.5.3. Logic
The Fault Hold Duration slider sets the logic condition for fault collection. Table 6-8 describes the
options and their function:
Or
Any one of the monitored faults occurring will cause the fault
condition to become active.
And
Only when all the monitored faults occur will the fault
condition become active.
Table 6-8: Logic Options
6.4.6. Collective Faults – Video 1
The Collective Faults – Video 1 tab, shown in Figure 6-10, controls which alarms are used to determine
a ‘Collective Fault’ alarm on Video 1. To select a fault, check the checkbox beside it.
For brevity, only “Collective Faults – Video 1” will be shown. “Collective Faults – Video 2” has an identical
menu.