Specifications

7700/7800 MultiFrame Manual
7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover
Revision 1.0 Page - 61
6.6.2.2. OSD State
The OSD State radio button is used to enable or disable the On Screen Display. When enabled, the paths
output video will have an on-screen burn-in with a text box containing the various IntelliTrak statistics.
6.6.2.3. Source Input
The Source Input combo box is used to set the reference video for the IntelliTrak analysis. This audio
and video timing for this input will be taken as the reference point when compared to the destination
video. Table 6-10 describes the selections available:
ACO1 Video1
ACO1 Video2
ACO2 Video1
ACO2 Video2
Table 6-10: Source Input Menu Options
6.6.2.4. Destination Input
The Destination Input combo box is used to set the comparison video for the IntelliTrak analysis. This
audio and video timing for this input will be measured as offsets of the Source Input. The available
choices are the same as in the Source Input selection.
Video from either the ACO 1 or ACO 2 path can be selected and compared to each other.

Each ACO path needs to have its video standard set. To do an IntelliTrak
comparison between different video standards, connect one feed to the ACO1
path and the other to the ACO2 path.
6.6.2.5. IntelliTrak Thresholds
The IntelliTrak Thresholds sliders define the threshold limits for when an alarm is generated.