ÍNDICE 1. INTRODUCCIÓN ...................................................................4 1.1 ESPECIFICACIONES....................................................................4 1.2 ESPECIFICACIONES TÉCNICAS................................................4 1.3 CONTENIDO DEL EMBALAJE....................................................5 2. DESCRIPCIÓN DEL PRODUCTO............................................5 2.1 PANEL SUPERIOR........................................................................6 2.
5.2 GESTOR DE CANALES.............................................................20 5.2.1 ORGANIZAR DE CANALES................................................21 5.2.3 ORDENAR DE CANALES....................................................22 5.2.3 AGRUPAR DE CANALES....................................................23 5.2.4 EDITAR CANALES...............................................................24 5.2.5 BORRAR TODOS.................................................................26 5.3 CONFIGURACIÓN...
7.2 TETRIS........................................................................................42 7.3 GOLPEA LA RATA......................................................................42 8. OTRAS FUNCIONES............................................................43 8.1 ELEGIR RESOLUCIÓN DE SALIDA VGA..................................43 8.2 ENTRADA DE DVD O VCD.........................................................43 8.3 OPERACIÓN PIP (PICTURE IN PICTURE).................................
1. INTRODUCCIÓN Gracias por adquirir el Sintonizador externo de TDT para Monitor y TV APPTDTLCD de Approx. Este dispositivo adopta la más nueva tecnología de procesamiento de video digital, tecnología integrada 3D y no requiere de ningún otro software o hardware para su instalación. La salida de alta resolución y la tasa de refresco proporcionan imágenes de alta calidad y reducen el parpadeo de pantalla. 1.1 ESPECIFICACIONES • Búsqueda completa de canales. • Soporta el sistema DVB-T TV.
1.3 CONTENIDO DEL EMBALAJE • Sintonizador externo de TDT para Monitor y TV APPTDTLCD • Mando a distancia • 2 Pilas AAA 1.5V • Cable VGA • Cable de audio estéreo • Adaptador de corriente • Antena DVB-T 2.
2.1 PANEL SUPERIOR • POWER (Tecla de encendido): Cambia entre el modo PC y el modo TV. • SOURCE (Tecla de interruptor de video): Cambia entre las señales de entrada TV, VIDEO y S-VIDEO. • MENU (Tecla de menú): Abre/Cierra el menú. • VOL- / VOL+ (Teclas de control de volumen): Aumentan o reducen el volumen de la TV y permiten navegar entre las opciones del menú. • CH- / CH+ (Teclas de selección de canal): Permiten navegar entre los canales de TV y permiten navegar entre las opciones del menú. 2.
2.3 PANEL TRASERO • AUDIO OUT (salida de audio): Aquí se conectan altavoces externos para la salida de audio de programas de TV o dispositivos tales como reproductores VCD y DVD. • LINE IN (conector de entrada de audio estéreo ): Aquí se conecta el cable de sonido estéreo de la tarjeta de sonido del ordenador. • DC 5V (alimentador de corriente): Aquí se conecta el adaptador de corriente. • VGA OUT (salida VGA): Aquí se conecta el monitor. • VGA IN (entrada VGA): Aquí se conecta el cable VGA.
2.
• PAUSE: Pausa la reproducción de programas de TV y archivos multimedia • RESUME: Reanuda la reproducción de programas de TV y archivos multimedia • : Programa anterior • : Programa siguiente • SOURCE: Selecciona entre el estado TV/ S-VIDEO/ Compuesto • PICTURE: Selecciona entre diferentes gamas de color • LANG: Muestra el lenguaje de audio del canal de TV • DISPLAY: Muestra la información del canal de TV • PIP: Entra en el modo PIP (Picture in Picture) • PREVIEW: Previsualización de los canales de TV •
4.1.1 Entrar en el sistema DVB-T Cuando encienda su Sintonizador Externo de TDT, entrará en el modo DVB-T (Televisión Digital Terrestre) Si no hay programas de TV o Radio almacenados en la base de datos del equipo, se visualizará el interfaz del sistema. Si existen canales almacenados en la base de datos del equipo, cuando encienda el Sintonizador se mostrará el último canal visualizado antes de apagar el equipo.
en curso. Vuelva a presionar esta tecla para volver a activar el sonido. 4.3 CAMBIAR ENTRE TV/RADIO Presione la tecla “TV/RADIO” del mando a distancia para cambiar entre TV y RADIO. 4.4 CAMBIAR DE CANAL 1. Presione las teclas de dirección Arriba/Abajo “ ” del mando a distancia para ir al canal anterior o posterior en el modo de pantalla completa. 2. Presione la tecla “OK” del mando a distancia para entrar en la lista de selección rápida de programa.
Utilice las teclas de dirección Arriba/Abajo “ ” para seleccionar el canal favorito. Presione “OK” para confirmar la selección. Por último, presione “RETURN” para ocultar el menú. 4.5 MOSTRAR INFORMACIÓN DE PROGRAMAS Presione la tecla “DISPLAY” para mostrar la información de los programas actuales cuando esté en el modo de reproducción normal (TV). 4.6 VOLVER AL CANAL ANTERIOR Presione la tecla “RECALL” en el modo de reproducción normal para volver al último canal visualizado. 4.
2. Presione las teclas de dirección Izquierda/Derecha “ ” para cambiar entre “stereo”/”left”/”right” (estéreo/ canal izquierdo/ canal derecho). Presione las teclas de dirección Arriba/Abajo “ ” para cambiar entre los distintos idiomas de sonido. Presione la tecla “OK” para confirmar la selección y volver al modo de reproducción normal. Presione “RETURN” para regresar al modo de reproducción normal sin guardar los cambios. 4.8 GUÍA ELECTRÓNICA DE PROGRAMAS (EPG) 1.
• Campo (7): Información de Ayuda de teclas, correspondientes a las teclas de cuatro colores en el mando a distancia.. Presione las teclas de dirección Izquierda/Derecha “ entre los campos (4) y (5). ” para cambiar 2. Presione la tecla Roja para entrar en el modo Semanal, que muestra los programas y la información de éstos en diferentes horarios a lo largo de una semana. • Presione “ ”y“ “ para cambiar entre los días de la semana (de Lunes a Domingo) en el campo (3).
4.9 TELETEXTO 1. Si quiere ver el teletexto, por favor, presione la tecla “TELETEX” del mando a distancia para abrir la ventana de visualización del teletexto, tal y como se muestra en la imagen siguiente. 2. Introduzca con el teclado numérico los tres dígitos correspondientes a la página del teletexto que desee consultar. 3. Presione la tecla de dirección Arriba “ ” para moverse a la página anterior, o presione la tecla de dirección Abajo “ ” para ir a la siguiente página. 4.
2. Presione las teclas de dirección Izquierda/Derecha “ desactivar los subtítulos. ” para activar/ 3. Presione las teclas de dirección Arriba/Abajo “ ” para elegir el idioma de los subtítulos. 4. Presione “OK” para guardar la configuración. 5. Presione “RETURN” para salir de la pantalla de selección de subtítulos sin guardar las modificaciones. 5.
En el menú principal, presione las teclas de dirección Arriba/Abajo “ ” para elegir la opción de TV Digital que desee configurar y presione “OK” una vez para entrar en el menú. 5.1 INSTALACIÓN Existen tres tipos de modos de instalación: • Búsqueda de área: escanea el área buscando programas. • Búsqueda manual: busca los canales manualmente. • Búsqueda automática: busca los canales automáticamente.
5.1.1 Búsqueda de área La búsqueda de área es un modo práctico e inteligente de buscar canales, que cubre los canales de la mayoría de países y regiones. Actualmente, el sistema incluye los siguientes países: Alemania, Reino Unido, Italia, Francia, España, Holanda, Taiwan, China, Noruega y Finlandia. El país por defecto en el sistema es España, pero lo puede modificar en “TV Digital > Configuración > Configuración del sistema > Área”.
Durante la búsqueda, presione “RETURN” si desea detener y salir de la búsqueda. Si al finalizar el proceso se ha detectado algún canal, el sistema saldrá de la ventana de búsqueda y almacenará el canal, al mismo tiempo que regresará al menú de instalación, mostrando el canal en la ventana de previsualización de forma automática. 5.1.2 Búsqueda manual Esta opción es para usuarios avanzados que posean conocimientos sobre TV Digital.
de previsualización de forma automática. 5.1.3 Búsqueda automática Puede buscar los programas en cualquier rango de frecuencias. Puede entrar en la ventana Búsqueda automática presionando las teclas de dirección Arriba/Abajo “ ” en el menú de instalación y, a continuación, presionando “OK” cuando la opción esté resaltada. 1. Antes de buscar de forma automática necesita configurar algunos parámetros relevantes como: • Frecuencia de comienzo (KHz): La frecuencia por defecto es 474000KHz.
RADIO. Puede acceder a la ventana a través de “TV Digital > Gestor de canales”, tal y como muestra la imagen. 5.2.1 Organizar canales La ventana de organización de canales incluye canales favoritos, borrar canales, mover, bloquear y renombrar. 1. Puede acceder a la ventana de organización de canales a través de “TV Digital > Gestor de canales > Organizar canales”. 2.
guración del canal del siguiente modo: • Presione la tecla roja para ajustar un canal como Favorito. • Presione la tecla verde para borrar un canal. • Presione la tecla amarilla para saltar un canal. • Presione la tecla azul para ajustar un canal como bloqueado. 3. Para renombrar un canal presione las teclas de dirección Izquierda/ Derecha “ ” para acceder a la ventana Renombrar canal, tal y como se muestra en la imagen. 4.
1. Si no existen canales en la base de datos, aparecerá una ventana emergente con el mensaje “Canal no disponible” y no se podrá acceder a la ventana de ordenación de canales. 2. Antes de ordenar, el tipo de ordenación deberá ser ajustado según los siguientes parámetros: • Primera opción: Elegir los programas para ordenarlos según el área de selección. • Segunda opción: Presione FTA (canales gratuitos), Scramble (canales codificados) o Todo (todos los canales).
Películas, Deporte, Música, Niños, Moda, etc. Puede acceder a la ventana de agrupación de canales mediante “TV Digital > Gestor de canales > Agrupación de canales” en el menú principal. 1. Si no existen canales en la base de datos, aparecerá una ventana emergente con el mensaje “Canal no disponible” y no se podrá acceder a la ventana de agrupación de canales. 2. Presione las teclas de dirección Arriba/Abajo “ ” para elegir el canal que desea agrupar.
1. Si no existen canales en la base de datos, aparecerá una ventana emergente con el mensaje “Sin portadores” y no podrá acceder a la ventana de edición de canales. Presione la tecla roja del mando a distancia para entrar en el menú Añadir canales.
• Nombre de canal: Presione las teclas Izquierda/Derecha “ entrar en la ventana Renombrar canal. ” para • PID Audio, PID Video, PCR PID: Presione el teclado numérico (0~9) para ajustar los valores. Presione “OK” para confirmar las modificaciones realizadas. El sistema mostrará el mensaje “Actualización realizada” y regresará a la ventana de edición de canal. Presione “RETURN” para volver a la ventana de edición de canal. 2.
los canales de TV?”. Presione las teclas Izquierda/Derecha “ ” para seleccionar “Sí” o “No”. A continuación presione “OK” para confirmar. 2. Para borrar todos los canales de RADIO, presione las teclas Arriba/ Abajo “ ” para mover el cursor hasta la opción “Todos los canales de radio”. Presione la tecla “OK”. El sistema mostrará el mensaje “¿Borrar todos los canales de radio?”. Presione las teclas Izquierda/Derecha “ ” para seleccionar “Sí” o “No”. A continuación presione “OK” para confirmar. 3.
Digital > Configuración > OSD” en el menú principal. Todas las opciones aparecen listadas en el cuadro de la izquierda del menú de configuración del OSD. Cuando el cursor se mueve a través de las opciones disponibles, los valores posibles para dicha opción aparecerán en el cuadro de la derecha. Presione las teclas Arriba/Abajo “ ” para desplazarse entre las opciones del menú OSD. Existen las siguientes opciones en el menú de configuración del OSD: 1. OSD: Ajusta el tema del menú.
idiomas para el OSD. Con el cursor sobre la opción Idioma de OSD, presione la tecla “ ” para colocar el cursor en la lista de selección de idioma. A continuación utilice las teclas Arriba/Abajo “ ” para elegir el idioma y presione la tecla “OK” para confirmar la selección. El lenguaje del OSD se cambiará automáticamente y el cursor regresará al cuadro derecho de la ventana de configuración del OSD. 7.
navegar por ellas utilizando las teclas Arriba/Abajo “ ”. Los ajustes posibles para cada opción aparecerán en el cuadro de la derecha. 5.3.2.1 Modo de pantalla El tipo de TV puede cambiar el modo de salida de video. Este parámetro puede ser ajustado en el Modo de pantalla de acuerdo con equipo receptor. 1. Mueva el cursor con las teclas Arriba/Abajo “ ” hasta la opción Modo de pantalla.
cionar el valor deseado. 2. El modo de salida de video puede ser ajustado a: CVBS, RGB, P-YUV, P-RGB o S-Video. 3. El valor por defecto es RGB. 4. Presione “OK” para guardar la configuración. El sistema mostrará el mensaje “Actualización realizada”. 5.3.2.4 Brillo Puede ajustar el nivel de brillo de la imagen para una mejor visualización. 1. Mueva el cursor hasta la opción Brillo mediante las teclas Arriba/Abajo “ ”.
5. Presione la tecla “OK” para guardar los cambios. El sistema mostrará el mensaje “Actualización realizada”. 5.3.2.6 HUE Ajusta el HUE del sistema. 1. Mueva el cursor hasta la opción HUE mediante las teclas Arriba/Abajo “ ”. Utilice la tecla Derecha “ ” para acceder a la lista de selección de valor HUE situada a la derecha. 2. Utilice las teclas Arriba/Abajo “ ” para elegir el valor HUE. Presione “OK” para confirmar y desplace el cursor al cuadro de opciones de la izquierda. 3.
En el menú de configuración del sistema: 1. Presione Arriba/Abajo “ ” para elegir la opción que desee modificar. 2. Cuando el cursor esté sobre la opción deseada utilice las teclas Izquierda/Derecha “ ” para elegir el valor deseado o la tecla Derecha “ ” para entrar en la lista de selección de la derecha, por la que podrá desplazarse mediante las teclas Arriba/Abajo “ ”, confirmando la selección con la tecla “OK”. 3. Presione la tecla “OK” para guardar los cambios y regresar al menú anterior. 4.
5.3.4 Hora A través de “TV Digital > Configuración > Hora” del menú principal, puede ajustar los valores de hora del sistema. Puede ajustar los siguientes parámetros en el menú Hora. • Modo temporizador: ajusta el modo horario. • Fecha: ajusta la fecha. • Hora: ajusta la hora. • Zona horaria: ajusta la zona horaria. • Horario de verano: ajusta el horario de verano. En el menú Hora, existen dos modos diferentes: • Auto: se ajusta a través de las opciones Zona horaria y Horario de verano.
2. Utilice las teclas Arriba/Abajo “ ” para elegir la opción correcta. Presione “OK” para confirmar la selección. 3. Mueva el cursor hasta la opción Horario de verano y utilice las teclas Izquierda/Derecha “ ” para ajustar el horario de verano. Cuando el valor del modo temporizador está ajustado a Manual, utilice las teclas Arriba/Abajo “ ” para desplazar el cursor entre Modo Temporizador, Hora y Fecha. 1.
• Temporizador NO: ajusta el número de evento. El sistema puede soportar como máximo 8 eventos. • Modo temporizador: ajusta el modo temporizador a OFF, Una vez, Diario, Semanal o Anual. • Modo despertar: ajusta el modo despertar a OFF, ON, Canal, Mensaje o Grabación. • Canal al despertar: ajusta el canal programado para inicializarse con el evento. • Mensaje al despertar: ajusta el mensaje que se visualizará cuando se inicie el evento. Puede elegir entre Cumpleaños, Aniversario o General.
1. Presione el teclado numérico para introducir la antigua contraseña (por defecto “0000”). 2. Si la contraseña es correcta el cursor se moverá a la opción “Introducir nueva contraseña”. Utilice el teclado numérico para introducir la nueva contraseña de 4 dígitos. 3. El cursor se desplazará a la opción “Confirmar nueva contraseña”, donde tendrá que repetir la nueva contraseña. 4. Si la contraseña confirmada coincide con la nueva contraseña el sistema guardará los cambios y la nueva contraseña tomará efecto.
5.4.1 Descargar desde USB Esta opción le permite actualizar el software del equipo desde una memoria conectada al puerto USB. 1. Seleccione el archivo de actualización de Software ubicado en su memoria USB. 2. Presione “OK”. 3. Si el proceso de actualización se realiza de forma correcta, el sistema mostrará un mensaje de actualización realizada con éxito y se reiniciará. En caso contrario mostrará un mensaje de error.
Presione “RETURN” para volver al menú anterior. 6. REPRODUCCIÓN MULTIMEDIA DESDE USB Este equipo cuenta con un puerto USB que le permite conectar equipos de almacenamiento externo a través de USB. Actualmente, las opciones soportadas por la conexión USB son: reproducción de archivos multimedia, grabación y actualización del software del sistema. Los archivos soportados son MP3, JPEG y MPEG-4 (AVI). Para reproducir archivos siga los siguientes pasos: 1. Copie los archivos multimedia al disco USB. 2.
• Presione “PAUSE” para pausar la reproducción. • Presione “RESUME” para continuar la reproducción. • Presione “RETURN” para salir del modo reproducción y volver a la carpeta del USB. 6.2 MÚSICA En el menú principal utilice las teclas Arriba/Abajo “ ” para elegir la opción Música. Presione “OK” para confirmar y entrar en el directorio principal del dispositivo de almacenamiento USB. Presione la tecla “OK” para entrar en un directorio.
Presione la tecla “OK” para entrar en un directorio. Cada directorio muestra únicamente los archivos de imagen soportados y las carpetas. • Presione “RETURN” para volver al directorio anterior. • Presione Arriba/Abajo “ ” para seleccionar la imagen. • Presione “OK” para visualizar la foto. • Presione “ ” para visualizar el archivo anterior. • Presione “ ” para visualizar el archivo siguiente.
muñeco y empujar las cajas hasta las marcas. Presione la tecla “OK” para pausar el juego y poder usar el menú del juego. 7.2 TETRIS Para acceder al juego vaya a “Juegos > Juegos nativos > Tetris” desde el menú principal. A la izquierda, en el interfaz de usuario, encontrará cinco opciones: • Start Game: comienza el juego. • Setting: ajusta la velocidad y dificultad del juego. • Help: proporciona ayuda. • Score List: lista las mejores puntuaciones. • Exit Game: sale del juego.
y presione “OK” para comenzar la partida. Utilice el teclado numérico del mando a distancia para golpear a la rata cuando salga del agujero. Presione “OK” para pausar el juego y poder usar el menú del juego. 8. OTRAS FUNCIONES 8.1 ELEGIR RESOLUCIÓN DE SALIDA VGA Puede elegir entre las siguientes resoluciones de pantalla: • (4:3): 800x600 a 60Hz, 800x600 a 75Hz, 1024x768 a 60Hz, 1024x768 a 75Hz, 1280x1024 a 60Hz, 1280x1024 a 75Hz. • (16:9): 1280x720 a 60Hz, 1280x720 a 75Hz, 1600x900 a 60Hz.
• Presione la tecla “MODE” para ajustar la posición de la imagen. • Presione la tecla “PIP” para salir del modo PIP. IMPORTANTE: Para obtener la mejor imagen en el modo PIP, por favor, ajuste la resolución del PC y la tasa de refresco de acuerdo con la que tenga su Sintonizador Externo de TDT.
CONTENT 1. INTRODUCTION .................................................................47 1.1 SPECIFICATION.........................................................................47 1.2 TECHNICAL SPECIFICATION....................................................47 1.3 PACKAGE LIST...........................................................................48 2. PRODUCT DESCRIPTION...................................................48 2.1 FRONT KEY-PRESS INSTRUCTION.........................................
5.2.5 DELETE ALL........................................................................67 5.3 CONFIGURATION.......................................................................68 5.3.1 OSD......................................................................................68 5.3.2 TV..........................................................................................70 5.3.2.1 Display Mode................................................................70 5.3.2.2 Aspect Ratio........................
1. INTRODUCTION Thank you for purchasing this DVB-T LCD TV Box of Approx. It adopts the newest digital video processing technology, built-in 3D technology, and do not require any other software or hardware installation. The high resolution output and refresh rate provides high quality picture, and reduces screen flicker. 1.
1.3 PACKAGE LIST • DVB-T Recorder box 1 pcs • User’s manual 1 pcs • Full functional remote control 1 pcs • AAA1.5V battery 1 pair • VGA cable 1 pcs • Stereo audio cable 1 pcs • Power Adapter 1 pcs • DVB-T Antenna 1 pcs 2.
2.1 FRONT KEY-PRESS INSTRUCTION • POWER (power key): Switch between the PC status and TV status. • SOURCE (video switch key): Switch among TV, VIDEO, and S-VIDEO signal sources. • MENU (menu key): Open/Close MENU • VOL+/VOL- (volume up/down key): TV volume up/down key. And work with menu key to choose each item parameter. • CH+/CH- (channel up/down key): TV channel up/down key. And work with menu key to choose each item parameter. 2.
• AUDIO OUT (audio output end): Connecting to the external speakers (if available) to output sound of TV programs or connected devices such as VCD/DVD. • LINE IN (stereo audio cable input end): Connecting with the stereo audio cable to the PC sound card. • DC 5V (power supply): Connecting with the power adapter. • VGA IN (VGA input end): Connecting with VGA cable, the other end of VGA cable connected with PC display. • VGA OUT (display switch): Connecting with the monitor.
2.
Media playing • : Preview program • : Next program • SOURCE: Switch between TV/S-Video/Composite status • PICTURE: Switch among different color temperature • LANG: Display the language of audio under TV mode • DISPLAY: Display the information of the TV channel • PIP: Enter into PIP mode • PREVIEW: Preview the TV channels • MODE: Switch among the display resolution • SETTING: Setting the status of the OSD • (UP/DOWN, LEFT/RIGHT): Direction key and selection 3.
It will continue to play the latest program before previous power off if the database having and TV or RADIO program.(If failed to enter into the mode, please check above operations and ensure the remoter works well). 2. Power on When it is in “standby” mode, press “power” to power on. 3. Power off When it is running, press “power” will enter into “standby” mode. 4.2 VOLUME ADJUSTMENT AND MUTE 1.
Press number keys to input program number. If there are some favorite programs that been set up, just press “FAVORITE” key to enter into the favorite program list: Press “UP/DOWN” to select favorite program, Press “OK” affirm the selection, press “RETURN” to return to hide menu. 4.5 DISPLAY INFORMATION OF PROGRAMS Press key “DISPLAY” to show the information of current programs when it is in normal playing state. 4.
4.7 AUDIO LANGUAGE SWITCH AND L/R CHANNEL SWITCH 1. Press “LANGUAGE” key to switch the language of sound of current programs and switch among “stereo”/ “left”/ “right” (stereo/ left channel/ right channel). 2. Press “LEFT/RIGHT” to switch among “stereo”/ “left”/ “right” (stereo/ left channel/ right channel), press “UP/DOWN” to switch the language of sound. Press “OK” key confirm the selection and return to full-screen play mode, press “RETURN” to return to full-screen play mode but not save the setting. 4.
(6). Tab 6 shows the detailed program information in Tab 5; (7). Tab 7 shows hint information for keys, corresponding to the four colors on the remote controller: ZOOM,A-B,3D,ANGLE. Press “LEFT/RIGHT” to switch between Tab 4 and Tab 5; 2. Press “A-B” key to enter into Weekly Mode to display the programs and program information in different time ranges of the current program list within one week. (1). Press F.R & F.F key to switch between Sunday - Saturday in Tab 3; (2).
choose the detailed information corresponding to the current program. 4. When the cursor stops in Tab 5 or Tab 6, press the blue ANGLE key to enter Wakeup Timer menu to book programs. 5. Press “RETURN” to exit from EPG. 4.9 TELETEXT 1. If you want to watch teletext, please press “TELTEXT” on the remote controller to enter into EPG page. 2. Input three digits to go to corresponding page you want 3. Press “UP” to go to the previous page, while press “DOWN” to go to the next page; 4.
Press LEFT/RIGHT key to choose whether to open Subtitle, press UP/ DOWN key move upward and downward to choose language. 5. MAIN MENU In the main menu of the system, under Digital TV, there are such options as auto TV search or broadcast programs, program management, system setup, software update and software version information view etc.
5.1 INSTALLATION There are three kinds of Installation mode as follow: • Area Search: searching programs by scan area; • Manual Search: Search channels manually • Auto Search: Search channels automatically You can enter into parameter “installation page” via input password digital (default password is “0000”). 5.1.1 AREA SEARCH Area search is a kind of intelligent and convenient mode of programs searching, which covers programs of all frequent points of target countries or regions.
Taiwan/ China/Norway/Finland; The default country(region) of system is Spain (you can select target countries you want under system setting-->scan Area). You can move the cursor to “area search” via press “UP/DOWN” key under “installation menu”, then press “OK” to enter into area searching page. After entering into area search page, system will scan all programs one by one under frequency points of current countries or regions selected automatically.
relevant digits to modify it. • Band Width: the default value of bandwidth is 64MHz. While you can set it to 6MHz,7MHz,8MHz. 3. Press “OK” key after configuration of parameters to start manual scan. 4. If any program is detected and the scanning process is finished, system will exit the scanning page and save the program, at the same time return to the “installation menu” and to play them in vpp window automatically. 5.1.3 AUTO SEARCH You can search the programs of any channel. 1.
set it to 6MHz, 7MHz, and 8MHz. 3. Press “OK” key after configuration of parameters to start manual scan. 4. If any program is detected and the scanning process is finished, system will exit the scanning page and save the program, at the same time return to the “installation menu” and to play them in vpp window automatically. 5.2 CHANNEL MANAGER System offer an efficient function of channel management such as channel deleting, marking, moving, locking, sorting and grouping.
2. It will pop up and dialogue box prompting that “Channel not available” when there are no channels in database to enter into, and it will not enter into channel organizer page. Channel Organizer menu includes: Favorite Channel, Delete Channel, Skip Channel, Lock Channel.
After program editing, to edit the program, press OK key; to set or cancel Lock Program, the system will hint to input “0000”; to set Delete Program, the system will hint to choose dialogue box “Do you want to delete the selected items?”. Press LEFT/RIGHT key to choose ”Yes” to delete the program chosen, “No” to cancel; Press RETURN key to exit Channel Organizer page. 5.2.2 CHANNEL SORTING 1. The channels shall be listed according to certain sequence so that the user can easily find them.
3. Before sorting, the type of sorting shall be set, including the following items: • First Option: choose the programs to be sorted via the selection area; • Second Option: Press FTA (free of charge), Scramble (encrypted), ALL (Free and Encrypted Channels). • Third Option: According to alphabetic order A-Z, or Z-A. 4. Press UP/DOWN key choose Type , Press LEFT/RIGHT key to set Sorting Parameters. 5.
After channel is edited, when RETURN key is pressed to exit the menu, if actual channel editing action exists, the system will carry out channel grouping renewal, with the hint of “Update succeeds”. 5.2.4 EDIT CHANNEL Have such operations as Add, Delete and Rename to channels.
• Area Name: For Area Name, press the RIGHT key of the remote controller to enter the Area Name list on the right, then press UP/DOWN key to choose area name, press OK key to confirm. • Carrier: Press LEFT/RIGHT key to choose; • Channel Name: Press LEFT/RIGHT key to enter Rename Channel page.
To delete all TV channels, press UP/DOWN key to move the cursor to ALL TV Channels option, press OK key, then the system will hint with ”Delete all TV Channels?” dialogue box. Press LEFT/RIGHT key to choose “Yes” or No”, press OK key to confirm.
ward to choose the options in OSD menu. There are following options in OSD menu: • OSD Option sets system menu mode; currently, one mode is supported. • Time on OSD Option sets whether to display system time in full-screen play channel. Move the cursor to Time on OSD option, press LEFT/ RIGHT key to choose between On and Off, the default is Off.
• 1st Audio Language option: Press RIGHT key to enter the currently supported Audio Language list, in the Audio Language list, press UP/ DOWN key to choose language, press OK key to confirm. • 2nd Audio Language option: Press RIGHT key to enter the currently supported Audio Language list, in the Audio Language list, press UP/ DOWN key to choose language, press OK key to confirm;.
5.3.2.1 Aspect Ratio Video output mode can change the mode of video output, you can adjust TV mode according to the actual situation of you receiving equipment. (1) Move the cursor to Aspect Ratio option, press LEFT/RIGHT key to move circularly and choose options. (2) Aspect Ratio can be set as 16:9, 4:3 PanScan, 4:3 LetterBox. (3) Default Aspect Ratio 4:3 PS. (4) Press OK key to save the setting, the system will hint with “Update succeeds”. 5.3.2.
5.3.2.4 Contrast You can set system contrast via Contrast option. (1) Move the cursor to Contrast option, press RIGHT key to move the cursor into the Properties list on the right. (2) Press UP/DOWN key to move upward and downward the cursor to choose, press OK key to confirm, in this moment, move the cursor onto the options on the left, and then values will become the ones you want. (3) Contrast can be set as: 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% or 100. (4) Default: 80%.
(4) Default: 0. (5) Press OK key to save set, the system will hint with “Update succeeds”. 5.3.3 SYSTEM SETUP System Setup menu can provide convenient system setup, you can via menu (MENU -> Digital TV -> Configuration -> System Setup) enter System Setup menu.
Area To set scanning area and choose, choose area to download preset channel settings. Germany/ England/ Italy/ France/ Spain/ Holland/ Taiwan/ China/ Norway/ Swead/ Finland supported, depending on different version. 5.3.4 TIME Via menu (MENU->Digital TV->Configuration -> Time), enter time set.
the cursor into the Properties list on the right. (2) Press UP/DOWN key to move upward and downward the cursor to choose, you can see corresponding change in Time option. Press OK key to confirm;. (3) Move the cursor to Summer Time option, and then press LEFT/ RIGHT key to set Summer Time. 2. When the setting is Manual, press UP/DOWN key to move upward and downward the cursor to move only between Timer Mode, Date and Time.
• Wakeup Message: set wakeup message • Wakeup Channel: set wakeup channel name • Wakeup Date: set wakeup date • On Time: set wakeup time • Duration: set duration Hint with some related message at certain time: (1) Set Wakeup Time Event Number: Move the cursor upward and downward to Timer No. option. Press RIGHT key to move the cursor onto the right list. Press UP/ DOWN key to choose event number. Press OK key to confirm. (2) Set Wakeup Time mode: Set as off, move the cursor to Timer Mode option.
(3) Set Wakeup mode: This option has 4 options as OFF, Message, Channel, On. Press LEFT/RIGHT key to choose as Channel. If there is no channel in the database, this option cannot choose Channel; (4) Move the cursor upward and downward to Wakeup Channel option. Press RIGHT key to move the cursor onto the list on the right. Press UP/ DOWN key to choose Preset Channel, Press OK key to confirm; (5) Set Date: move the cursor to Wakeup Date option. Press LEFT/ RIGHT key to enter date set menu.
press on the remote controller to input new 4-digit Password. If it is confirmed the new password is different from the new Password input, the system will hint to input new password again, until they are consistent. After the password is set successfully, the system will hint the success and save the setting, and the new password will come into effect. 5.4 SOFTWARE UPGRADE You can automatically update the software of the equipment.
1. Copy media document to USB; 2. Plug in USB device; 3. Enter device in main menu. 6.1 USB MOVIE 1. In main menu, press UP/DOWN to choose USB Movie option. Press OK key to confirm, enter USB main directory. Press OK key to enter next directory, every directory displays only movie file and folder name.
• Press REW key to rewind music ( ×2, ×4, ×8, ×20, ×1); • Press PREV key to play previous music, press NEXT key to play next music; • Press LANGUAGE key to switch between the left and right channel and stereo; • Press PAUSE key to pause music; • Press RESUME to replay the music; • Press RETURN key to exit the music play mode and return to the file directory . 6.3 USB PHOTO 1. In main menu, press UP/DOWN to choose USB Photo option. Press ENTER key to confirm, enter USB main directory. 2.
tive Games->BoxMan step to play the game. 1. There are six function selection menus on the left of the interface for user: • New Game: Restart game • Reset: reset map • Continue: Continue game • Level: Display game level • Help: offer help information • Exit Game: exit game; 2. In New Game option, press OK key to enter Game, the function menu on the left, if turning into grey, cannot be used. 3. Press direction keys up, down, left and right to move the cartoon man here and there. 4.
6. Press OK key to pause game, Continue Game via the left function key, Main Menu returns to the previous menu, reset Game or exit Game. 7.3 HIT RAT Play: press “menu” under normal playing mode and select GAME-> Native Games->Hit Rat step by step to play the game. 1. There are five function selection menu on the left of the interface for user: • New Game: Restart Game • Speed: Set Game Speed, Press LEFT/RIGHT key to set • Score List: score list • Help: help information • Exit Game: exit the game 2.
reach to 1680x1050x60Hz. If you choose the resolution over the range of your PC display supporting, the monitor can not display. 8.2 VCD OR DVD INPUT OPERATION 1. Put AUDIO IN cable, VIDEO IN cable into AUDIO IN, VIDEO IN interface with VCD or DVD. 2. Turn on VCD, DVD. 3. Press “SOURCE” key on remote control and then you can enjoy the programs of VCD or DVD player on your monitor. 8.
Importado por / Imported by: APPROX IBERIA S. L. CIF: B-91202499 Soporte técnico / Technical support: soporte@approx.es MADE IN CHINA www.printyourideas.