User Guide

Power Cord
DC
Inlet
Power Adapter
SD Card Slot
SD Card
Air
Outlet
Tubing
Power Plug
Air
Outlet
Heated
Tubing
Heated
Tubing
Heated
Tubing Joint
Place the device on a firm
flat surface.
See User Guide page 4
Connect the Power
Cord: Insert the plug
of the power adapter
into the DC inlet on
the back of the device.
Connect the power
cord to the power
adapter. Plug the other
end of the power cord
into the power outlet.
NOTE: If you have a BPAP device see User Guide
page 4 to connect the Power Cord Locker.
Connect the end of the tubing
to the air outlet of the device.
If using heated tubing,
connect the heated tubing
joint to the air outlet of the
device, and then insert the
power plug into the heated
tubing port on the back of
the device.
Connect the other end of
the tubing to the mask
according to the user
manual for the mask.
See User Guide page 5
Press down the water chamber, and then remove
it. Open the water chamber cap and fill the water
chamber with approximately 360 ml of water.
See User Guide page 5
Close the cap after the water is filled and return it to
the device.
See User Guide page 6
1
2
3
5
6
Insert the SD card into the SD
card slot.
See User Guide page 6
Get Started
Reference your Apria Sleep Therapy User Guide
or go to Apria.com/Sleep for more details.
Your Apria Sleep Therapy
Quick Start Guide
React Health Luna
®
G3
let us
help!
4
Formerly known as 3B Medical, Inc.
Connect the device to a power outlet, press the
Start/Stop button and the device will start
delivering air.
See User Guide page 6
7