Instruction Manual

www.apricorn.com
12
Setting the Unattended Auto Lock Feature
To protect against unauthorized access if the drive is unlocked and unattended, the
Aegis Padlock DT can be set to automatically lock after a pre-set amount of time.
In its default state, the Aegis Padlock Unattended Auto Lock feature is turned off.
The Unattended Auto Lock can be set to activate after 5, 10 or 20 minutes.
To set the Unattended Auto Lock please use the following steps:
1. Enter the Admin mode by pressing and holding + 0 for ve seconds until
the LOCK indicator light ashes RED. This indicates that you can enter the
Admin Password.
2. Enter the Admin Password and press . The drive is in Admin Mode when the
ADMIN (A) indicator light has changed to BLUE.
3. Once in Admin mode, press + 6. The LOCK and ADMIN (A) indicator lights
should start ashing RED and BLUE intermittently.
4. Press one of the numbers below that corresponds to amount of time you would
like the drive to lock after no activity:
5. After you have input the number, the UNLOCK indicator light should ash
GREEN 3 times to indicate that you have successfully set the Unattended Auto
Lock feature.
Auto Lock Timeout Table:
1 = 5 min
2 = 10 min
3 = 20 min
0 = OFF
The default is 0 (OFF)